Latest activity
-
SGood way to do the repair. I go a little further for the "seal" after the filling of the void. The nonskid is ground smooth (dremel...
-
TI ended up replacing all of my rivets with these SS barrel nuts from McMaster. It leaves a very clean finish inside of the cabin...
-
TI had a similar issue when trying to drill out my rivets. One option is having a helper inside holding the rivet with pliers, another...
-
Tthataway replied to the thread Repair/Replace Gunwale Wood.Good way to do the repair. I go a little further for the "seal" after the filling of the void. The nonskid is ground smooth (dremel...
-
Tthataway replied to the thread Garmin 2006c.I have used I phone and I pad basically since they were available, on the C Dory in that same area, and had no problems. IF we have...
-
DayBreak replied to the thread 2026 Friday Harbor C-Brats Get-Together.This was another very successful gathering at Friday Harbor this year. We had 37 boats in attendance, including 41 groups of people of... -
DDonald Tyson replied to the thread Garmin 2006c.Do any of you fear getting moisture on the connections of your Apple or Android devices when using them with AquaMap? My current tablet...
-
CCoorsCrusher replied to the thread Repair/Replace Gunwale Wood.Thanks for the detailed response!
-
CDig out the rotted/wet wood. Fill the void with epoxy filler (either premixed or make your own). Clean up the opening after filling and...
-
CI had a similar issue on my boat where the core was not properly sealed and had some moisture damage around the rod holders as well as...
-
olekils replied to the thread repair rub rail.I had a similar issue when trying to drill out my rivets. One option is having a helper inside holding the rivet with pliers, another... -
olekils replied to the thread Repair/Replace Gunwale Wood.I had a similar issue on my boat where the core was not properly sealed and had some moisture damage around the rod holders as well as...
-
-
Sssobol replied to the thread Repair/Replace Gunwale Wood.Dig out the rotted/wet wood. Fill the void with epoxy filler (either premixed or make your own). Clean up the opening after filling and...
-
DDonald Tyson replied to the thread Basic Electrical.I did find that the shore power is not separated properly from the house power. It seems that the GFI is now defunct. Apparently the...
-
I picked up a second "walmat/ozark O2 cool" at the end of the summer for $9.95. This and the Endless Breeze both work well. We keep...
