New Lazarette Covers

Joel,

Let me know if you are planning on ordering any more Lazarette Covers.
I need a set. I have a 2006 CD22 and my leaking covers drive me crazy.
Let me know if you will be ordering more and I will send you a check for
the amount.

Thanks!
Mike
 
I've just revisited this thread that I've been watching since last year, 9 pages! So Saturday at the Boat Show, the new Sea Sport built 22 shows up with even smaller hatches! I think they were still the ones rated for vertical use. I guess we need to be able to put a big Asterik on threads that the builders should look at. *** The CD22 needs these hatches, large enough and rated for horizontal installation.

Picture_015.sized.jpg
 
No ...Those are the hatches...just the smaller size...I just can't imagine why the factory would do that....I would like larger if possible...but the ones I have are the largest size available to fit....

I will be stocking the hatches in April...(when I return up North) Same deal as before...at cost...no profit..just actural shipping ...I buy them in cases of 10 and divide the costs (5 sets per case) Wholesale....

In April I will post as soon as I get to the cabin...and start a list then...

Thanks

Joel
SEA3PO
 
Roger said:
"*** The CD22 needs these hatches, large enough and rated for horizontal installation."
Click to expand...

I'd like to second that The CD22 needs these hatches, large enough and rated for horizontal installation

And all the people said .....AMEN Guess I shouldn't be so loud, the nerds won't let me shout BIG and loud twice in the same post.

(No apologies for being boisterous here.) :twisted:

Harvey
SleepyC :moon
 
The company did switch over to the proper hatches...just the smaller size... I have no idea why...I doubt there is much if any difference in price...
I will continue to supply the proper hatches to anyone who wants them....(IN APRIL)

Joel
SEA3PO
 
The company did switch over to the proper hatches...just the smaller size... I have no idea why...I doubt there is much if any difference in price...
I will continue to supply the proper hatches to anyone who wants them....(IN APRIL)

Joel
SEA3PO
Click to expand...

I could have sworn that the ones I saw on the SS built 22 there were the old style hatches, and small, and mounted cross-ways (hinged aft, with the lid opening from the forward edge.) Roger, is your photo of the hatch on the '10 SBS show boat or is that a photo of what should be there? (Photo sure looks like what I got from Joel and installed to get rid of the leaky drain running down into the hatch every time I opened the cover.

Harvey
SleepyC :moon
 
Joel,

I need to be on the list for lazarette covers. Let me know where to send check.

Dwight
425-445-6848
 
In April we will start a list.... no need to do it now, I won't have any hatches until April anyway.

Joel
SEA3PO
 
What years do these hatches fit? Guess I should go back through all nine pages and look for the answer, just lazy.
 
Please put me down for 2 covers also. Mine are the old fiberglass grey ones that came on an 88. Thanks, Ron
 
I don't think the new hatches will fit a 1988 model....Those hatch covers were made by C-Dory out of fiberglass ....I always thought those worked well....

These are something like 13" by 15.5" (same size as the ones we are replacing) only these covers are designed not to leak...

I will be starting a list the first week in April and should be starting shipping a week later... I will continue the project all summer...(I travel during the winter) there will be plenty of time for everyone.

No list started yet..

Joel
SEA3PO
 
Wondering on those covers -- is it a flange that mounts and a cover? If so, is there any reason why I couldn't cut out the opening larger, and mount the flange and cover. Thanks, Ron
 
Yes the actual "hole" needs to be 12.750" by 10" minimum.... ours were actually cut a bit larger...the "flange" is fairly wide so they fit easily...on my boat I made some shims...they were really not needed...

Joel
SEA3PO
 
Joel, I'll cut the hole out as long as there is a flange that bolts down for the cover to go over. Thus, I need a pair. Thanks, Ron
 
I see Joel is placing another order for the improved laz covers, I would really like to place an order but first could someone who has them please let me know the outside dimensions of the lid and inside access dimensions when open.

I may have installation problems do to pot puller mount and battery access.

I canceled my original order last year but have since grown weary of the leaking hatches.

Thanks,

Jay
 
Inside: 12-1/2 x 9-5/8
Outside: 15-1/2 x 13-1/4

Warren
 
Thanks Warren, , much appreciated. :thup
 
Here is my dilemma:
From the dimensions that Warren posted the new covers are ½” wider, so as you can see my pot puller docking station is butted right up against the factory cover. So splitting the difference I would have to cut away ¼” of the new cover to accommodate the Scotty docking station. I can’t really move the docking station, its right on the edge of the lazarette mounted to ½” aluminum plate screwed and secured with JB weld.

The docking station is just a place to secure the pot puller out the way when not in use.

If there is enough play in mounting the new covers I could take ¼” from the outside but would still have to notch out a section of the cover to accommodate the mounting pin....or possible find a flat head pin just for mounting the puller to the docking station that doesn’t stick out and just use a snap pin on the other side.

Any thoughts out there? I would really like to replace these leaky covers; sure there must be a work around. I haven’t seen a picture of an open hatch so not sure how much material I can cut off and still maintain a seal.

Jay

IMG_2607.sized.jpg
IMG_2608.sized.jpg
IMG_2609.sized.jpg
 
breausaw":2m92cuqt said:
Any thoughts out there?
Click to expand...
My SWAG is that you could enlarge the lazarette hole in your boat slightly and to mount the new covers that much off center.

Warren
 
Back
Top