I tried making a hose connection that lead to a standard RV sewer connection (photo in our album)... no joy. Let's just say the macerator output has a lot of force. The only solution we've come up with isn't great: one person holds the standard RV sewer hose over the macerator outlet with the other end of the hose in the sewer connection, while the other person flips the switch. The BIG downside of this is the clean-up and storage of the sewer hose. RVs will dump their black tank first, then dump the gray tank to help flush out the sewer hose. If additional rising is necessary, you can use the city water connection. RVs also have a place to store a sewer hose; you'd have to have a RubberMade bin or something similar to keep the sewer hose, and then the space to keep that for the occasional use. Also, RVs have the sewer outlet on the driver's (port) side, our C-Dory has the macerator outlet on the starboard side.
Also, I am not aware of any commercial RV parks that will tolerate dumping of gray water on the ground. I also made a hose connection for the sink, but find it easier to just put a dishpan in the sink of the boat and dump it in the sewer outlet of the campground. No way to deal with the showerbox output, either - we use the campground's showers.
We just make it a point to put Wild Blue in the water often enough while land traveling to make use of a marina pump-out. Oh, and use the campground bathrooms as much as possible when on land.
Some things about our boats don't easily equate to an RV. We've been able to work around this, though... with over 35,000 towed miles on the boat. We do stay at RV parks when we are traveling with the boat.
In spite of them being referred to as "boaterhomes," there are some shortcomings when on land. Don't get me wrong, it is GREAT when we are on the water, and most "RVs" don't float! :wink:
Best wishes,
Jim B.