Search results

When drilling with a hole saw run the pilot bit in first then put on the hole saw and run it in reverse till it scores the gel-coat them cut the hole. I like to use temples and cut holes with a router. My Two Cents Guts

Thanks Don I realy want to look at the 19& 16 first I cant find the number right now but they are the bigest honda dealer in southern cal. that will make two dealers in L A... I will probly be looking at Suzuki or Yamie. have a Suzuki now and like it. honda should use injuctors in my opion...

First I would like to thank all of you for taking the time to reply to my post. As far as the six foot seas, what I was trying to imply was sloppy conditions/with wind. a good Question on how I would be using the boat? Well I would be fishing with no more than one other or most likely by my...

Hello as some of you have seen in my posts. I an interested in the c-dorys 16 curser and 19 . but not ruling out the 22, but I think it is a little bigger than I want. What I would like to see if I could find some one who has pictures of there dory at sea off shore. All I am finding is pics. of...

Gary I have a Boston Whaler Montauk17 now and am planning on going to LA in July to see the 16 cruiser and the 19 footer. They are going to be getting them at a new dealer so I have to wait till then at least I can get out on the water. The whaler is a great boat but only a bimi top. and no...

Sea Wolf This is a good idea I all so have a list and think it is a very good idea. the first on the list has to be (is the stern plug in? every ones list will differ I keep mine in (WORD) so I can print a new one each time as I check then off, or at least look at it before you leave the...

George I too am looking at the 16 curser and the 19 foot models, please keep us posted on your likes and dislikes. Thanks in advance Guts

Al if you can afford a auto pilot? They are really worth it. I assume this is the steering you got only for twins. Guts http://www.boatersworld.com/webapp/wcs/ ... ogId=10051

sorry for the dbl post Guts

[No message]

Al I find that my hydraulic steering to be a very smooth in operation. It will stay on coarse if the boat is trim and no one is walking around, what I am trying to say is that the motor can't turn because of the positive pressure. Therefore where you set your coarse the boat tends to stay on...

Moose did you replace it to put on a auto pilot? BTW: I have one of these... Guts http://www.consumersmarine.com/products ... 0&sb=0&p=0

You can swing the campus using a sun campus as I have done. I had a Marine Instruments & Repair person do this. But they can only move so far, I think sixty degrees is more than they can swing. I think they can use magnets also but only in extreme cases. I used a campus that had a metal housing...

This is what I posted. Guts http://www.sandiegofishing.com/buddydb/ ... adid=27990

Fishtales I am thinking I would like to buy a c-dory. but there will not be a 16 or a 19 foot in la till July. might go to look at the 22s in Santa Anna Saturday, maybe? have things to do here and I do not really want a 22 footer. I am concerned about the flat bottom and the ride (I just don't...

Sorry it had been allready posted

Hello My name is Kim but my user name is (Guts) I will use Guts from now on. I would like to say I'm am new to this site. I picked up a Trailer Boat magazine at the doctors office an saw a article on a place called Shelter cove page 79 Trailer Boat magazine April issue, on page 80 I saw a boat...