Search results

Our first C Dory 25 had the 130 Honda. Cruising LaKe Powell, or Alaska loaded for a month at a time with all food, and full tanks, plus one or two dogs and 2 adults, we were running in the 16 to 18 mph on a plane-- as fuel burned off, we could cruise closer to 20 mph. Top speeds were a little...

Congratulations and welcome aboard! First time I have seen a Catahoula on the dash of a C Dory--probably the first time I have seen a Catahoula ib a C Dory. Dogs and C dorys go hand in hand, as to kayaks! Now the Catahoula in a Kayak....that might be a different story. From the photos...

It will be very intersting to see how you improve on the design with the 3D printer. Good Choice. What material will be used? Us old guys forget about that method of parts replacement.

It's this time of year, (or every other year these days) for Race to Alaska. The second leg leg of this race is from Victoria Harbor BC to Ketchecan, AK. The second day out, a Farrier 32SR foiling Trimaran "Northbound Nutters" is way in the lead having already passed thru Seymour Narrows...

Occasionally you may find a 22 cruiser under $25,000. Unfortunately most have gone for almost double that recenty. There are a couple for $28,500. At the lower price you may be looking at a repower in the next few years (15K range). Occasionally a 22 comes up with a low hp--50 or so. and...

I noted an article in Boat US this month. "Norway's Fleet of 'Flying Electric Ferries'. These are hydrofoil boats by Candela Electric boats. The specific boat in the article is a passanger ferry catamaran which runs on foils. But many of their boats were monohulls. Here is a video on an...

Never broke one off. I would use a Dremel tool and clean. up the corrosion to the base metal. Not sure that tab is alumium. However, this is a good place fo use J B weld. I have used in on life line stantions and it held well. A nighbor had a problem with an alumum block GMC diesel. He...

I buy "no see-em" fine net from an army surplus store. It was fabricated for a tent about 8x 10 feet ??, I have made wintow screen for at least 4 C Dorys and given away a fair amount of this insect screen. I glue velcro along the edge of the screen, and the mating vecro on the window frame...

The epoxy is stronger, and gives much better secondary bond to other materials than polyester resins. I am not sure what you mean by "fiberglass cap". Epoxy, polyester and vinyl ester resins all have different properties. The vinyl ester resins are about half way between the polyester and...

Probably wear on the clutches. Are you doing properly inspecting the clutches for corrosion or wear? The windlass should be washed down with fresh water after each use. I prefer the Horizontal Lewmar. There often is not enough "fall" for the rhode/chain because of the size of the anchor...

We have done from St. Croix confluence to the Illinois Confluence. Your stretch is about 300 miles, and that means hustling to make that 50 miles a day. There are lots of great towns along the way. "Meandering Notes of a Riverlorian", by Mike Link & Kate Crowley is certainly worth reading...

Hatteras white is the color that many of us have used. I don't know if that is available now.

My 2003 cruiser had a pastic tank. The work done was to redo much of the cockpit floor, which had caved in due to core delamination due to being left in the open with no cover in New Jersey during the winter. Some of the plastic tanks have splits, some of the metal tanks have pin-hole corrosion...

Not a lot of cars maybe a few pickups, and ATV's in Bella Bella (indigenous people) or Shearwater (haul out and boat repair, marina) But one would not know that without "outsider" knowledge or having visited there a few times. Sort of the only civilization in several hundred miles from...

There are a lot of changes since we first at Ocean Falls. The Hotel and all of the rooms were intact, including the medical clinic, store etc. There was free Cable TV at the dock--about the only place with that in BC. The dock was much shorter, and no ferry boat ever came there. I suspect the...

The way I would handle this, is what I did in a Van Conversion which we did. I would make the dinette into a bench seat, with a fold out back to support the extra width of the bunk. 20" wide seat, and 20" wide back, folded down gives. you 40" and still enough to slide by when walking fore and...

Fantastic. We rarely got any video clips, and you have done a great job of bringing us to the Islands of the Bahamas. A number of years since I have been there, and this brings back great momories. Thanks!!!

Inflatable dinghys are often stored on transoms, with metal fittings added to the outside of one of the tubes. That would be "harder" on the storing on a platform. You can easily add any lifting points you want. There are "D" rings with fabric (PVC or Hypalon). which glue to the boat. I...

The idea of counter rotating props is for better handling in heaver cats. (the port engine turns clockwise (right-handed) and the starboard engine turns counter-clockwise (left-handed). This is the way my Tom Cat was set up. It tends to push the bow down more than the conventional way props...

Send a private message to DeNag or TyBoo--the administrators. Theyare listed under "members" several rows down as "Staff" send them a private message to one of these requesting removal of the ad.