clamps

clamps

  • Reaction score 0
  • Comments 0
clamps

clamps

  • Reaction score 0
  • Comments 0
ready to bond in place

ready to bond in place

  • Reaction score 0
  • Comments 0
bottom after removing the 3d printed plug and bottle jack

bottom after removing the 3d printed plug and bottle jack

  • Reaction score 0
  • Comments 0
core ready for hole

core ready for hole

  • Reaction score 0
  • Comments 0
panel in the bottom of hole

panel in the bottom of hole

  • Reaction score 0
  • Comments 0
bottom side where the old thruhull was. this plug is holding a piece of the glass panel I made up from the bottom so it can be feathered in

bottom side where the old thruhull was. this plug is holding a piece of the glass panel I made up from the bottom so it can be feathered in

  • Reaction score 0
  • Comments 0
set in place, need to grind a little still

set in place, need to grind a little still

  • Reaction score 0
  • Comments 0
template for sealing off the sump from the cockpit

template for sealing off the sump from the cockpit

  • Reaction score 0
  • Comments 0
cockpit side of sump under step in door

cockpit side of sump under step in door

  • Reaction score 0
  • Comments 0
sump ground out

sump ground out

  • Reaction score 0
  • Comments 0
cabin floor ground down

cabin floor ground down

  • Reaction score 0
  • Comments 0
grinder was too aggressive, should have used a sander

grinder was too aggressive, should have used a sander

  • Reaction score 0
  • Comments 0
panel is made and trimmed

panel is made and trimmed

  • Reaction score 0
  • Comments 0
making a panel

making a panel

  • Reaction score 0
  • Comments 0
making a panel

making a panel

  • Reaction score 0
  • Comments 0
after peeling off the plastic

after peeling off the plastic

  • Reaction score 0
  • Comments 0
second layer in and weighted down, boat hook keeps the blocks from sliding downhill

second layer in and weighted down, boat hook keeps the blocks from sliding downhill

  • Reaction score 0
  • Comments 0
first layer

first layer

  • Reaction score 0
  • Comments 0
two layers of 3/4 balsa

two layers of 3/4 balsa

  • Reaction score 0
  • Comments 0
ground and cleaned with acetone

ground and cleaned with acetone

  • Reaction score 0
  • Comments 0
getting ready to lay the balsa

getting ready to lay the balsa

  • Reaction score 0
  • Comments 0
heater going inside and warming it up

heater going inside and warming it up

  • Reaction score 0
  • Comments 0
inside the $100 wedding tent

inside the $100 wedding tent

  • Reaction score 0
  • Comments 0
C

Patch from a collision?

  • Items 247
  • Album owner clayhubler
  • Date created
There are no comments to display.

Album information

Category
Core rot repair
Album owner
clayhubler
Date created
Item count
247
View count
8,808
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

C

clayhubler

Media items
553
Albums
32
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top