Stern tie-downs?

[DALampe]

Our 2000 C-Dory does not have tie down/towing eyes at the stern. I don’t like the idea of using the cleats on the gunwale. I’m considering adding U-bolts to the stern panels for tie downs and possibly towing an inflatable dinghy. Please see the attached photo. Any thoughts?

 

[Standas]

That’s what I did on my previous C-Dory, I used a piece of Starboard as a backing plate for the U bolts.

 

[Schuster]

Yes, by all means. Our C25 had them installed I think from the factory. It seems to me that every boat I've ever owned had them. I use them to attach my rear tiedown stramps to the trailer for towing. I have also put a towing bridal on for towing the dingy although I found it easier to just use one of the rear cleats for that. They give you a backing plate with the U-bolt but I do like the idea of also using the Starboard as Standas mentions.

 

[ssobol]

My boat came with tie down rings on the stern. (Ignore the circle.)

 

[C-Wolfe]

On my 2006 22 cruiser, the core in the transom did not go all the way to the corner creating a substantial difference in thickness, I’m assuming it’s pretty standard across the years. A couple inches on either side will make it easier to install backer plate.
You most likely noticed this but figured I’ll mention it anyway.