SS PROP

J

jerryb6647

New member
Hi C-Brats . I have a 19 feet C-Dory with a BF90D Honda ,i cruise at 4100 rpm and don't tow a dinghy . i like to put on a SS Prop .What do you C-Brats recommend .Thanks for you help. Jerry
 
The SS will flex slightly less, but probably can go with the same size. What is your speed at 4100, and what is the WOT RPM and speed?
 
stainless performs a little better
If you have a prop strike stainless may blow your bottom end
If you have a prop strike with aluminum you will loose the prop
Chris
 
I have a 19' angler with a BF90 Honda and run a 13.5x15 Honda aluminum prop. WOT is just a bit below 6000 RPM. This is with me 160 lb with a heavy crew about 260 lb aboard and 48 gallons of fuel. I work in rivers where 7 ft of water is deep. I usually visit the prop shop at least once a year. I am probably going to change to a composite prop. in the future. They are easier on the lower unit and cost less to repair. I am willing to give up a little performance.
What I am trying to say where you use and what you do is a big consideration in your selection.

Guy
 
Back
Top