OK. Here goes. I am needing input, guidance, assistance, help...on hooking up the NMEA 183 between each unit at higher speed of 38400 Baud.
The directions on the SH website conflict w/ the SH owner's manual.
SH Manual says: brown wire =NMEA DSC output (-)
SH Website says: brown wire = AIS out (+)
I just want to know, simply, what wires from the radio go to what wires from the Garmin. Is that too much to ask?
Page 4 http://static.garmincdn.com/pumac/GPSMAP720_InstallationInstructions.pdf
http://www.standardhorizon.com/inde...075389DC4199A79B6C1&DivisionID=3&isArchived=0
RADIO:
BLUE NMEA GPS input (+)
GREEN NMEA GPS input (-)
GRAY NMEA DSC output (+)
BROWN NMEA DSC output (-)
GPS:
BLUE NMEA port 1 out
BROWN MNEA port 1 in
GRAY NMEA port 2 out
VIOLET NMEA port 2 in
GREEN spare
WHITE spare
ORANGE accessory on
YELLOW Alarm low
The directions on the SH website conflict w/ the SH owner's manual.
SH Manual says: brown wire =NMEA DSC output (-)
SH Website says: brown wire = AIS out (+)
I just want to know, simply, what wires from the radio go to what wires from the Garmin. Is that too much to ask?
Page 4 http://static.garmincdn.com/pumac/GPSMAP720_InstallationInstructions.pdf
http://www.standardhorizon.com/inde...075389DC4199A79B6C1&DivisionID=3&isArchived=0
RADIO:
BLUE NMEA GPS input (+)
GREEN NMEA GPS input (-)
GRAY NMEA DSC output (+)
BROWN NMEA DSC output (-)
GPS:
BLUE NMEA port 1 out
BROWN MNEA port 1 in
GRAY NMEA port 2 out
VIOLET NMEA port 2 in
GREEN spare
WHITE spare
ORANGE accessory on
YELLOW Alarm low