Oar Locks

T

Tug

Member
Joined
Jun 22, 2007
Messages
996
Reaction score
0
C Dory Year
1985
C Dory Model
22 Angler
Hull Identification Number
DOR22241H585
Vessel Name
Drifter
I have what appears to be oar locks on my boat. They are positioned a couple of feet aft of the cabin bulkhead and mounted on the inner facing side of each gunnel. Would they be oar locks or some kind of older model rod holder.Tug
 
Tug":1srsmb44 said:
I have what appears to be oar locks on my boat. They are positioned a couple of feet aft of the cabin bulkhead and mounted on the inner facing side of each gunnel. Would they be oar locks or some kind of older model rod holder.Tug
Click to expand...

Almost certainly rod holders. Most likely these from Scotty but a bunch of manufacturers make similar mounts. Do they look like this?
sml241_flat.gif
 
Tug, picture woulda helped. You talking about these in your album, through the window on the LHS of the photo? It's a bracket for something, maybe a bimini support or something. Certainly not an oarlock. I'd ask the previous owner if he installed them and what they were for.

P8090052.sized.jpg


Charlie
 
They are made of bronze i think, they are not like any rod holders i have ever seen. I will take a picture and post it in my album. Thanks Tug
 
They DO look like oarlocks, particularly if made of Bronze. Can't imagine Rowing a 22 though... :disgust

charlie
 
Thats the one i had in mind....was thinking of drilling it out to accept a holder holder but it is hard to drill. I will email the previous owner to find out what is was meant for. Thanks Tug
 
Charlie ...they look like oar locks to me....they have a four or six sided ( opening ) receiver and a small opening on the side which accepts a locking screw.Anyway i will posted a clearer picture. Tug
 
If they have hexagonal receivers, I'm still betting they are for rod holders or something similar that one wants to place at just a few different angles. I have also seen some similar devices that were installed to hold arms with pulleys on them for pulling pots. Maybe they're for that.
 
Roger ....that is probably what they are for.........Tug
 
Well hey....some propulsion is better than no propulsion! It would be a hell of a row though :shock:
 
I think they are Tempo pole holders. I have a couple, but no mounts. If you think they'll work, you can have them for shipping. They are slightly under 5/8" hex. Ron

IMG_0622.jpg


IMG_0623.jpg
 
Back
Top