Locking Generator Storage Box and Operating Platform

Joe,
Yes - it seems like an elegant solution. I wish I could take all the credit, but as mentioned above, I inherited it. When I saw this thread I felt I ought to share it with all the members. I'll post the measurements tomorrow.
 
Here are the dimensions for the generator platform on Lucky Day

[/img]http://www.c-brats.com/modules.php?set_albumName=Lucky-Day&id=Dimensions_from_side&op=modload&name=gallery&file=index&include=view_photo.php[/img]

The platform is 12 1/4" wide. If viewed from above, the starboard side has an angle cut at the forward end to accommodate the angled seat in the stern.

The material used to cover the chain and to pad the ends appears to be a soft plastic tubing with a wall thickness of about 1/8". The edges of the platform are covered with a sheet metal or aluminum cap.
 
Ooops -- My attempt to load the photo directly into the post didn't work. (There must be some HTML code missing.) The photo with dimensions is in the album.
 
Dimensions_from_side.sized.jpg

Right Photo?
 
That's the right one - many thanks.
 
Back
Top