Help with freshwater tank install 89 Cruiser

G

gcrown22

New member
The previous owner of my boat took out the tank in my boat and cut the hoses out of my 89 cruiser, I have never had a chance to see how the freshwater tank was originally installed under the dinette seat. I want to get it all hooked up but not even quite sure how the tank actually sat in its cubicle whether it was on it side or standing up?

I assume the large fill hose goes to the large opening on tank with some kind of adapter? I see a spot for a smaller hose on the tank which I think runs over to sink area? I want to hook to eventually have this hooked to sink and install electric pump for sink.
Anyone have any pictures of this freshwater setup so I can get an idea of what I need to do? Thanks for any and all help appreciate it!
 
The large fill hose should direct connect to the "fill" hose. Usually 1 1/4 to 1 1/2 ", there is Vent on the top or upper side--and that goes to the "Vent" on the side of the hull. Usually 1/2 or 5/8" tubing

The outlet is at the bottom of the tank. As I recollect this is 1/2". and will be the lowest side of the tank--a little deeper than the outboard edge. So deepest edge inboard, with outflow hose there.
 
Back
Top