Help San Franisco area

[pettit]

I have a custom built 22 cruiser for sale. its 04 it has no Galley or table .I need too look at a boat some where in my area around my vintage that has a table and galley . I am considering in stalling one I have race car fiberglass guy looking for work. Who by the way does great work. So any one in northen CA would be willing too let us take a look IT WOULD be greatly appreicated.



jim pettit 925 798 4668



WILL supply BEER

 

[thataway]

Jim,
If you cannot find a boat, there are lots of photos of both the standard interior and some which have been modified under the photo albums. You may come up with a better idea than the "factory". Some have had a settee on the port side, and then made an upper bunk which went over it--and used a table closer to the center, rather than the fore and aft dinette which is standard. Also the front seat slides aft in some boats--and makes a forward facing passanger seat in front.

 

[mailbox101]

You would be welcome to look at mine if you are just trying to get a general mental picture, but our models are very different.

Bob's idea is probably best, but I couldn't ignore a post of "Help San Franisco(sic.) area" as there aren't that many of us Brats in the area.

Alternately, I wonder if the factory could sell you a set of what you need. Even though they would be charging factory prices, it might well be cheaper as they have existing molds to work off of, whereas your friend would be starting from scratch. It might also look more professional, and give you a better resale value, as this is your stated goal.

David

PS Just me if you want to get together.