BobArrington
New member
We are about to take delivery of our new 22C in a few weeks and as I have shared our purchase with many boating friends I am regularly asked about the boat and when the description of the hull is discussed I am frequently asked how that flat bottom is going to handle the steep short chop of the back bays and sounds where we will be using her.
A little history: I live in Baltimore and do much of my boating in the Chesapeake Bay aboard our 44' motoryacht. Our 22C is going to be kept at a second home in North Carolina and will be used to explore the Pamlico Sound from its rivers out to the Outer Banks of NC. The Chesapeake Bay and Pamlico Sound are simular in that they are large shallow open bodies of water where waves stack up quickly.
All of my expierience on planning hull boats in our type of conditions (close steep seas) has steered me towards boats with a transom deadrise of at least 15 degrees to soften the entry. Boats I have run with a flat bottom pound hard in these conditions.
I raised this issue with the dealer (who also sells deep vee center consoles) when looking at the boat because he certainly knows our waters and he said he would rather be in a C-Dory in rough conditions then any other boat he sells. He said the key is understanding the hull, learning how to trim it and managing the speed.
As I have mentioned in previous postings it is largly your groups experience that confirmed our decision to purchase this boat, but my decision is nagged by the sideways looks I get when I discuss the design with fellow boaters that aren't familiar with the brand.
I would love the benefit of all of your experiences to answer these questions when I'm asked if I'm crazy for buying this kind of boat for these kinds of waters.
Thank you,
A little history: I live in Baltimore and do much of my boating in the Chesapeake Bay aboard our 44' motoryacht. Our 22C is going to be kept at a second home in North Carolina and will be used to explore the Pamlico Sound from its rivers out to the Outer Banks of NC. The Chesapeake Bay and Pamlico Sound are simular in that they are large shallow open bodies of water where waves stack up quickly.
All of my expierience on planning hull boats in our type of conditions (close steep seas) has steered me towards boats with a transom deadrise of at least 15 degrees to soften the entry. Boats I have run with a flat bottom pound hard in these conditions.
I raised this issue with the dealer (who also sells deep vee center consoles) when looking at the boat because he certainly knows our waters and he said he would rather be in a C-Dory in rough conditions then any other boat he sells. He said the key is understanding the hull, learning how to trim it and managing the speed.
As I have mentioned in previous postings it is largly your groups experience that confirmed our decision to purchase this boat, but my decision is nagged by the sideways looks I get when I discuss the design with fellow boaters that aren't familiar with the brand.
I would love the benefit of all of your experiences to answer these questions when I'm asked if I'm crazy for buying this kind of boat for these kinds of waters.
Thank you,