Hi Chester,
Bob and Brent gave you the main site for Diamond Sea Glaze parts.
Or call Toll Free (North America): 800-770-0455 Ext. 3150 and ask for Clyde Roswell, who was very helpful.
clyde.roswell@advantecglobal.com
or Email E-mail:
am.parts@advantecglobal.com
You can buy single cam handles (right or left), or a set including right and left as well as the blocks they lock on to; that’s what I bought under the theory that once older nylon parts like these start failing just replace them together. The complete set is cheaper than ordering two cam handles. The top part of the cam handle has a horizontal part that fits over the window frame upper surface. The black sticky window sealant is not involved. Cut if off with a glass scraper if it bothers you.
If your center window adjusters are getting sticky or hard to tighten down, for $26 each replace them too if over 10 years old. My new ones are rock solid. I’m very happy with this investment.
The C-Dory fasteners are Robertson (square head) machine bolts that have been cut off at thread # 8-15 and fit into holes in the center window frame that are tapped. DON’T LOSE THESE FASTENERS, AND THE TOP AND BOTTOM ONES WILL BE DIFFERENT LENGTHS.
Different subject: I think the large side window closers at $30+ are way over-priced (though I bought two). Try the stainless steel Perko ‘sliding window handle’ made in USA Perko cat # 0954dposts for $10 on Amazon and epoxy it to the glass.
Re fishing, all we know is that fresh Gulf grouper and jumbo Gulf shrimp fresh off the boat are $14 and $10 a pound at Perdido Seafood 6 minutes from our house.
We plan a 6 week adventure starting mid July 2020 trailering the 2,700 miles and exploring the San Juans and Broughtons, so get ready to share your ‘don’t miss this’ list with us.
Tomorrow’s high is only 76 degrees, but we will run the F150’s anyway since Yamaha says to do so every 8 weeks.
Happy window repairs!
John
