Bimini wanted

C

cmag

New member
Joined
Oct 12, 2012
Messages
4
Reaction score
0
Hello CBrats. I just bought an 1990 22 angler and would like to know where to get a bimini top in burgundy or white that will fit without a bunch of mods. I am in San Diego county Calif. Any info will help.. What is a good price for one???? Tom R.---- "CMAG"
 
Welcome Tom. I used a stock Bimini on the 22 I had. It was ~84" wide or so and 96" long. Your cockpit is a little longer on the Angler but this would cover a lot of it. It came in various colors, was easy to setup and attach to the boat and came with a "boot" for when it was folded and "stored". Get the optional support poles that will keep the folded setup in the air and off the stern.

Google <taylormade bimini>. It's made by TAYLOR. it was a 4 bow model I think, probably around $400 if I remember correctly. You can see some pictures in my album.

Charlie
 
Or this:

1_10_2012_from_Canon_961.highlight.jpg

Harvey
SleepyC :moon
 
And here's a big picture of the one on my 22. On further inspection, it was a 3 bow model, the one on my first TC was a 4 bow. Not recommended to leave it up as I did at higher speeds. Photo_13.jpg
 
Thanks Roger.

My aft rack for the inflatable is removeable, and so it is not always up. I like that for flexability.


Harvey
SleepyC
 
Back
Top