85 E-Z load trailer for 22' C Dory Angler rear roller broken

[Tony NFTF]

purchased new in 1985 from the Tolands at C Dory in Kent a 22' Angler and E-Z load M 6 3100 trailer. I was unaware that they modified the trailer and installed lateral bunks and a large roller across the back. Well the roller broke and C Dory and E-Z load are no help finding a replacement, anyone know if those rollers are still available somewhere.

 

[UncleRichie]

picture would help a lot
Richard

 

[Wandering Sagebrush]

Tony, check drift boat trailer sources. They often use rollers all the way across the back.

 

[thataway]

The trailer parts are not made by C Dory or the trailer manufacture. We don't have any idea of what type of roller you have: length, diameter in the center, diameter at the ends, diameter of steel bar which goes thru the center. Once you have these measurements, you can go on line and find a replacement. Just search "trailer roller" . You will find a replacement there. Also there is most likely a trailer parts outfit near where you live. Again with the measurements you can call around and find the item you need.