Search results

Selling my ’07 Honda 90 HP BF90DKLRTA with 1,500 hours. This motor is in good condition, runs great, and has been well maintained with documentation and service records available. Highlights: • Smooth, quiet, and fuel-efficient Honda reliability • 1,500 hours – well cared for and serviced on...

After meticulously polishing and waxing Plan C for the last 8 years, I finally decided it was more than I wanted to deal with. After checking around, I was referred to Jeff and his crew at Marine Detail Specialists (https://marinedetailspecialists.com/) VERY well done!!! Plan C is shiny and...

I've been pretty meticulous cleaning mold from the both inside walls of the fuel tanks under the motor well, in the starboard battery compartment and in the area back around the drain plug of my 22' '05. I figured there was mold on the other sides but, until I took off the panel protecting the...

When the table leaf on the cabin table of my '04 22 cruiser is folded down, it bangs on the table leg. I put a felt pad between the leaf and the leg but, having just put on a new table leg - the old one was pretty rusted - I would like to fix this while I've got momentum. Any ideas?

I've got 3 lines going into the base of the fuel/water filter. I get that one is 'in' and the other is 'out' but what's the other one that has a female hose fitting?

When I first met my wife, I told her with a wink there was a dozen things I did well in life. After a miserable opening, I may have to drop shrimp fishing from that list. We did not do well (MA6). The usual spots (pun intended) that have never failed to give us multiple limits in a single set...

I've used Sta-Bil for years and never had any fuel issues. Today, as I was getting things ready for spring, I read the label and noticed it's only good for 2 years. According to Dr Google, the code tells you when it was made. "16264-87649-2233. This bottle based on the code was made on the...

I'm encouraging them to stop increasing the limits then turning around and closing the season early like they have in 3 of the last 4 years. I've got a list of email addresses and a copy of a letter I sent to everyone from the Director on down thru the Commissioners, Advisory Group and Shellfish...

I'm hoping someone here has already researched this and come up with a good replacement. Electronics isn't my strong suit. The only thought Ive got is minimizing the replacement of cables and fittings to the Garmin GMR18HD radar and the GSD24 sonar I've got. Thoughts?

I don't understand how WDFW can increase the limit in MA 6 and 2 weeks later, close the season because the quota had been reached! This is the 3rd (or 4th) time that's happened in the last 5 years!! And it was the quickest closure and the shortest notice - 1 day - than any of the other ones...

The Cornet Bay launch will be open Tuesday as will the restrooms BUT.... the overflow parking will NOT. Usually the Park opens the road down to Hoypus to accommodate the crowds on an openings like Lingcod/Shrimp/Salmon/Crab. The upper lot and the spaces next to the launch will be open. There...

The 2nd issue now with my Honda BF90D - first the ECU that ultimately had to be replaced and just now the leaky thermostat cover which turns out to be a material defect in the power head. My research indicates Honda is/was aware of both of these and had some recall activity but not for the 90...

Parts of the shells and tails of the uncooked spot prawns we are pulling from the freezer are black. We've always frozen them individually on a cookie tray and put them in Ziplocks bags. Anyone got an idea of what's going on or what do to to keep them better?

At the end of last year and so far this year, there's been a dramatic difference between two different types of pots I have. There are 2 really nice pots - round, stainless mesh, green vinyl coated, entrance ramps and 1/2 of the top opens up. I've got (now) rusty sash weights in the black...

I have always put the transom drain plug on the inside of the boat. Until last year, a neighbor and very experienced boater, suggested it go on the outside. That way if anything happens to it, the water pressure will keep in in place. "Something could hit it and knock it off" was my initial...

'04 22' Cruiser. When I open up the access port under the porta potty, I saw 1/2" or so of water. Sponged it out and forgot about it, thinking it was condensation? Is it?

'04 22' Cruiser. When I open it up, I saw 1/2" or so of water. Sponged it out and forgot about it, thinking it was condensation? Is it?

At the bottom of my tach for my Honda 90 where the hours are displayed (digitally), there's a flashing 'B' that isn't explained in the owners manual. RPMs on the tach are shown with a needle but it has a digital readout for engine hours. It's just to the left of the hours where I get a...

I had just finished installation of a new depth finder, zip tied all the cable runs and was idling at the dock, looking at the new display menus and admiring my work. And the engine just............quit. The engine - Honda 90 - wouldn't turn over and I couldn't even raise it. Dead. Long story...

As I advance the throttle between 3,200 and 3,800 RPM, the engine hesitates and recovers 2-3 times. below that or above that, it runs smoothly. Carl at EQ looked it up and said surging was either the low pressure fuel pump ($200) or the Electronic Control Module ($1,000) We had EQ do a 400 hour...