Search results

I got a great deal on a Stainless prop from amazon it was only $165 and they had 7 available when I placed my order on 7/14. I thought it was to good to be true but it arrived today and it was legit. I plan on testing it out on Sunday. I checked amazon today and its up to $299 "still a good...

Rivet failure I put some pictures on my gallery. I am thinking a good fix would be to remove the RTV or whatever the sealant was used and squeeze in some 5200 and drill out the center rivet and replace it with a stainless bolt and washer and replace the other two rivets on each side of the...

Our 22 Cruiser is generally loaded on the moderate side. 2 adults midsize dog, weekend supplies. Boat has a newer 90 Suzuki alum Michigan wheel vortex 14" x 15 pitch. That prop works real well but now has a ding on one blade. I carry a spare Michigan wheel vortex 13" x 19 pitch. Just curious if...

I ran across a picture of a C-Dory on a FB group that has some boarding steps. We have been using a cooler as a step. I uploaded the picture in my photo section. Anyone have an idea on where to get them or something similar.

I bought a 13’ whaler a while ago and have yet to pick it up. The whaler is in NJ and we are based out of Upstate NY on the Hudson about a 130 miles north. We are taking our C-Dory down next week by water to NJ and the person I got the whaler from is suggesting he make bridal and I tow home...

We bought a Westmarine RU-250 rollup and want to cruise with it inflated. I was hoping to just use some ratchet straps to hold it down. The bow seems ok when we thread the ratchet straps through the port/starboard rings attaching to the rooftop bars. Because the inflatable is much wider than the...

Our 22 Cruiser only came w/ one and I was having an issue finding them local so I ordered a 10 pack from amazon. Not sure how to post a photo of the blank key here so I just added to my album so you can see the style key I bought. If you need one send me a PM i would be happy to drop one in the...

I picked up a nice 2004 22’ Cruiser in the fall. It ran great w/ the original Honda 90 w/ a 15 pitch prop. The boat has trim tabs and I found them very useful in our limited usage last fall. We are getting her prepped and ready for the 2021 season. We purchased a 2020 Suzuki for a Whaler last...

I have been searching for one of those 6-8 tube roof top rocket launcher style rod holders for my 22 Cruiser. Can anyone point me to a good source or provide some input on your setup. Tight lines Sean

I have the typical rub rail separation I have seen so many others report in this group. I am a fairly new member and have poked around many of your albums and searched the form and have not run across anyone they has replaced the rub rail with anything other than the factory one. I have always...

We have a 22 Cruiser I have a rack that holds 6 rods but is intended to bolt on the inside gunnels walls vertically. I was thinking of painting a 4x4 chunk of wood and bolting it to the roof so we could bolt the rod rack on there, Also add 2 or 4 rod holders around the gunnels, If anyone has...

We get to the launch and I climb up on the trailer and found the door lock must have vibrated the lock and the keys are in the ignition. I put my finger through the screen and slide it back and my 4' 10" wife was able to climb through the window and unlock the boat. I plan on getting another key...

Sitting on her new trailer. Notice the front support piece is not high enough, the dealer said the weight is mostly in the rear and the bow roller is ok. I am questioning that the more I think about it and am going to look into raising the support. I wanted to use the boat this weekend and bet...

I am purchased a 22 Cruiser w/out a trailer. I was offered from a friend the trailer he used for his 21’ Sea Ray. It is a 24’ Tandem Axle roller trailer. I wish it was a little longer but I do not plan on trailering the boat aside from getting it home which is close to 200 miles then she will be...