Search results

2/Bill K Bill Kelleher

I read letters left to right, not up and down. I feel like I have to have my head sideways to read the letters. Bill Kelleher

I just said that because that is the way my Bertram was built. Bill Kelleher

My yacht club burgee on the bow of my 22' is 14"H x 24"L Bill Kelleher

All you have to do is tie the two tanks together on the intake side of one pump. Bill Kelleher

On mine the letters are on one side and on the other side you see the back side of the letters. ( I hope that makes sense ) LOL Bill Kelleher

It is my understanding that the commercial ships have a way of tuning out the smaller vessels that have AIS transponders. Bill Kelleher

The secondary filter should be finer than the primary. Bill Kelleher

The red button is for turning off the breaker ( like when the boat is on the trailer ) Bill Kelleher

Just a thought, if you don't fill the bowl you will know for sure if your bulb is working by seeing the bowl fill up. Yes I know it takes longer and is more work. :) Bill Kelleher

I wonder if you have two pickup hoses and a selector valve that may have been turned off. Bill Kelleher "Also there seems to be a series of hose inputs all over and a little complex for me."

Thanks Bob, very useful chart for my other boat. Bill Kelleher

Thank's Roger :) Bill Kelleher

Here is what I did for steps, I can put them on either side. Works good at a dock but not good for me when coming up a stepladder when on the trailer. Bill Kelleher Sorry for the small size, it took me 15 minutes just to get the picture here. LOL

For what it's worth, My boat had some grey fuel line on the kicker engine when I bought it this spring. I went to move the kicker fuel tank and that grey line snapped in two. Yes it was cold outside but the black hose on the big engine had no problem. Bill Kelleher

Are you sure your pressure switch is working ? Bill Kelleher

Is there any chance you have somebody near your home that could ship your punches to you ? Bill Kelleher PS: I looked up a roll punch - that looks like it would work really well, and better than a dowel because of having a tapered end. Just for the record, this is now the approximately 307th...

I will not put a complete loop around the cleat first. I use to do that till all the water in the west end of lake Erie got blown to the East end and my boat was hanging by a stern line and had to be cut to release the boat. Bill Kelleher

A heat gun or a hair dryer and a plastic or nylon puddy knife will get the old decal off. ( keep the heat moving ) I went to a sign shop and had my boat name and the C-Dory decal made. I just copied some pictures from different albums on here. and they made the C-Dory decal up. Bill Kelleher