Search results

uh-oh.. what'd I do? The quick answer is that everything worked out very well on the trip, etc.. but, I'd want to understand if 'wrapped the hull' -- raises a concern I didn't consider? As you know.. it's amateur hour up here.. so I'd certainly welcome any concerns or considerations I may have...

Fender Covers

Fender Covers 2

We recently completed a loop of the Erie / Oswego Canals - and went up through Lake Ontario / Thousand Islands. Great trip. I had read about covering the fenders with burlap.. to protect from the sides, slime and wear of the locks.. and adapted some slicker/stronger pet food bags for the same...

Bench up 1

Bench seat 1

Bench seat 2

Bench bed 1

Bench bed 2

After doing a bunch of reading on these forums.. we went ahead and put a bench seating arrangement into the cockpit of our 26' CC/Venture. Thanks for all the information / inputs. This will fold up, out of the way- set-up as a bench seat.. or lie flat as a bed. I also got some additional teak...

Update > Fuse blown -- and confirmed that the pump is shorting out. While I know some of you more experienced guys re-build, I think I'll just get a replacement. * Any recommendations on replacement shower pump? Also-- I had a very tough time getting the tubing off this pump.. and wondering...

I just went through this exact scenario on a '07 Cape Cruiser '26. I could not find the hex screws.. no room to see or access between the top of the wiper and the roof over-hang. Sawz-all and the fact that marinco does not sell parts to replace the severed shaft.. then led me to need to...

Thanks All -- great input and it sounds like maybe a couple different systems being referenced. To confirm our set-up, here's some more information * On/Off Switch: We have one of these (picture added to album). Located in the shower controls. * Looped End Exit through Hull: I believe this...

On_Off

Shower Drain_Hull Exit

I have a 2007 Cape Cruiser/Venture 26' Had been fine on this water issue .. until last fall when a big rain filled the cockpit and bilge pump failed. Water (about an inch or so) seeped between the hull and cockpit floor -- and I didn't find out until this spring. I have had a slantback built...

Shower Pump / Pump Gard

I am trying to sort out the proper fix for our shower - 2007 Cape Cruiser 26. I have read a number of posts in the forum -- and decided I really need to inspect the sump pump and either replace or bypass. Problem is > how do I gain access to it? In the port cabinet, I have a Jabsco PumpGard...

Added a copy of our custom slant back to our album. Using camper back zipper and snaps -- aligned to wrap around bimini poles.. so we don't need to break that down each time. To do this again, I might have preferred folding the bimini forward.. resting on the cabin roof.. and making the slant...

SlantBack_Wrap bimini