Search results

I have a 2005 Angler 19 with solar panel, controller and dual house batteries. Everything works great. I have purchased a small 5k AC unit that runs on AC. I also have a Honda 2000 generator to run it when off the hook. The AC unit is mounted behind the passenger seat. I can roll up the left...

I purchased the Garelick steps for my 19 Angler. They work great. But, I drilled out all the rivets and replaced them with stainless bolts and nylocks. The steps don’t flex anymore.

If you put a 135 on a 22, I would recommend renaming your boat “Chine Walker”.

I think it is important to preserve the original post, especially ads, to avoid any later edits to change what might have been stated in the original ad. Follow up posts are fine to clarify or revise.

I’ve heard about the lost tank molds also. But here is my experience… I ordered new tanks for my CDory from Fisheries Supply in Seattle, Washington. The part numbers were FT2339 and FT2340. They are 23 gallon tanks and fit perfectly. Just a tad shorter in height than the original 24 gallon...

The level of help fellow CBrats offer is astounding. Gulf coast Jon, thanks for all the detail. Goodland is on my shortlist for a launch point to spend time in the Everglades. Let us know how safe and secure it is if you use it. I would be a little wary of Everglades City for long term...

I had a bad pickup in one of the tanks on my 2005 Angler 19. I stripped the tank fitting trying to remove pickup. I decided to replace both tanks and all fuel fittings and hoses. I think I still have one of the original tanks (starboard?). You are welcome to it, just cover shipping. I can...

Another project on my list! Can you share the manufacturer and part number please?

SSilver, after the response I got on my for-sale listing, I was sorry I didn’t list it for more! I think your $5,000 price was great. I thought I was optimistic with my $4,000 price. The reason I shared my experience was to encourage anyone thinking of upgrading to not underestimate the value...

I made the move for several reasons... the new motor is significantly quieter, fuel injected, and piece of mind. The Angler 19 has an open back so less noise is a big plus! I do solo long trips and I don’t want to worry. And, I don’t pretend to be a “wrench”. I’m good with maintenance, but...

I talked to my service dealer about upgrading my motor. I have a 2005 Honda 90 motor with 700 hours on it. The 2005 motor is carbureted. The dealer had ONE new Suzuki 90 in stock. Order times on Honda and Yamaha motors are four months plus. I got the motor with controls and nmea2000 cables...

I drilled out all the screw holes around the gas tank retaining strips in my 2005 Angler 19. I drilled one inch holes in the deck and then cleaned out any damaged balsa around the holes. It was very easy to tell when my one inch bit hit the hull under the balsa. I ordered three quarter inch...

My 2005 Angler 19 with a Honda 90 rides on a 2005 Shore Landr single axle trailer without brakes. I do a lot of towing over 500 miles each way and am thinking about a new trailer. I always empty the boat before trailering, but I do usually fill up before I head out. It’s so much easier to...