Search results

custom size insulated fish bag

tow vehicle charging connection

Yamaha fuel injected 115 with 170 hours, hundreds of hours of custom detail work done on this boat but slow construction for the last 2 years has forced me to give up the struggle to make the payments. Raymarine c80 fishfinder gps chartplotter simpson lawrence vertical winch w/delta anchor...

cockpit fold out bed

convertable fuel tank cover/bed

The cape cruiser has a cored top so I just ran a ss sheet metal screw thru all those spacers.The track is alumium but the little rollers have steel in them so hopefully won't rust to bad. One time I did have a sea lion do a canon ball at me and splashed salt water all the way on to the dash/...

Yes It rolls pretty easy so you have to have a lock pin so it won't slide forward when you slam on the brakes :lol: Fuel vent: the original fuel vent did not have a loop in it( there was no room as it was to high under the gunnel) so any water sprayed at in could go right into the tank. The...

ovens rolled forward

toaster,micro closeup

rolled to aft position

aluminum oven hanger

Just finished a boat project that I have been working on for awhile.I did not want to hit my head on the microwave when washing dishes so I made a movable mount for my microwave and toaster oven. I used 2 pocket door tracks so that when on the move the ovens stay aft above the wallas and sink...

Another heartfelt Thankyou to Jim and Kathy for the great cruise and breakfast and to John and Robin for hosting us at wheeler island. What a nice bunch of new friends and great boats. Hope to see you all on another cruise soon. bob

Jim, Alright , sounds good , should be there mid morning. Thanks for all your planning and preparation. bob

Sorry this is rather late but I just noticed on my map that there is more than one boat launch at rio vista, are we launching at the "delta marina and yacht club" launch? I have never launched there before so just wanted to be sure , thanks. bob

thanks, it was a bit of work but worth it. I bought the water heater from west marine, it does come with heat exchanger hookup but did not use them with the outboard of course. Not to many choices with 750 watt/ 120 volt elements, and the flat shape helped in mounting.

My boat came with the round yamaha gauges and the 2 fuel tanks were wired thru a selecter switch. I have noticed my trim indicator now also is not as accurate as it used to be.

I also wanted hot water for washing dishes and showers so I bought the isotemp 4.2 gal electric water heater. Only 750 watts so it runs off of my yamaha 1000 watt gen or of course shore power. I just camped for a week at lake mead and it worked great. I have put hot/cold hand held shower in the...

I also had the worthless yamaha gas gauge on my 06 cc. One of the 1st things I did is install 2 mechanical gauges hooked up to the original sending units. It is fairly accurate when the boat is level and I like being able to see the fuel level in both tanks at same time ( no fuel gauge selecter...

lopez island