Search results

Ashbreez Boatworks LLC (Chad & Joel Morse) Anchorage Did a good job of bringing my boat back from the brink When I discovered a wet transom and hull. Not cheap but excellent to work with and they did what they said they would do. I would definitely use them again. Jack

The holes in the transom fit a 1977 115 Johnson as well as a 1997 Honda 90. My recollection is a 25" motor shaft but measure it up to be sure. Jack

The rub rail on my 2005 26' ProAngler was loose and leaking when I purchased the boat in Fla. The surveyor missed it as well as other poor construction techniques. I repaired the rub rail myself using S.S. bolts, washers and locking nuts all bedded in 5200. Ok after 6 yrs. My boat is just...

Glad to see the old High Tide has a new owner after being stolen in August. Good luck to the new owner. Jack on High Tide II

I received an e-mail from the repairman doing my boat repair in Anchorage. I am in Az. He sent pictures of the completed repairs. Looks excellent. The cost jumped up from $7300 to $18000 but I had no options other than cut it up and put it in the dumpster. That 2005 yr. boat was poorly...

found out that my transom and hull in front of it are water logged. $7300 estimate. No choice but to do it.

jon...... A friend and neighbor of mine repainted his stripes on his 1996 C-Dory. It was dark blue and he repainted it bright red. It looks excellent and has lasted over 15 yrs. Good luck

Today while leaving Anchorage we spotted a real pretty and shiny catamaran (BLACK CAT) along the Old Seward Hyw. south of town. It was mostly black in color and beautiful. Also......my boat (HIGH TIDE) is in Anchorage at a boat repair shop trying to find the source of the water coming out of a...

About 20 yrs ago I installed a trailer winch to retrieve my boat, a 22' CD. It only took part of one summer to turn it into a big old clump of rust and it shorted out. Back to the 2 speed cranker.

I had my 26' C-Dory shrink wrapped last fall. He came to my house in Ninilchik, Alaska and shrink wrapped my boat in about 1 1/2 hrs by himself. He did an excellent job. $440 USD My son and I removed it this past spring saving all of the materials. I believe we can reinstall it this fall...

Make sure that the fuel line and bulb are going in the correct direction.

The good news is it has been located hidden under a large tarp behind a garage on upper O'Malley road. 3 police men showed up and they have 5 scumbags in handcuffs and in jail. It has been totally stripped of everything screwed on it except the teak hand holds and bow rail. Motors and hydr...

MY SON'S 1983 ANGLER 22' C-DORY WAS STOLEN OUT OF A LOCKED UP STORAGE AREA IN HIS APPT. COMPLEX YARD IN ANCHORAGE, ALASKA NEAR SITKA AND DEBARR ST. ALL OF HIS FISHING GEAR AS WELL AS ELECTRONICS WERE NOT IN IT AS THEY GOT THAT LAST TIME. NAME OF THE BOAT: HIGH TIDE I WHITE FIBERGLASS WITH...

I purchased my 2005 26' C-Dory ProAngler in West Palm Beach. THe boat was inspected by a local surveyor and included 35 pictures and an oil sample and test. Cost of survey was $500. I then had it towed to Wenatchee, Wash for $3200 where we picked it up and towed it to Anchorage, Alaska. It...

I just went on a fishing trip with 6 men and came back with 200 lbs. of halibut. My 26' C-Dory ProAngler handled it just fine. Jack in Alaska

Still looking for the part.

I received one for Christmas but have not installed it yet. That is my project for this week. But............ Somehow I have misplaced the transducer mounting plate. It has two slotted holes and one for locking it in position as well as a hinge mounting position for the transducer. Does...

They jilted me on a service appt. today so am po'ed at them. I actually called them back. They did not have a plug but took one off of a new Honda. Works for me. Now I love them again. Jack

on my 2003 Honda 200 hp. I need a new fill plug that screws into the hyr. reservoir. It has a phillips screw driver indent in the end. They are plastic and not very durable. ]Where can I buy a couple of those.??????????? Thx. Jack in Alaska

My 2003 Honda 200 hp has a cooling water pressure gauge on the dash. It runs about 23-25 psi. When the pressure starts to drop I will change the impeller. It has been changed twice. Right now I have only 490 hrs on it and 15 yrs old. Jack