Search results

That is quite the trip you have planned and we all will be following along on your adventures! Hope you are able to post reports along the way!

Oh Nooooo! Do you remember what slip on the H Dock the truck went down on? Several of us have fishing rods, so we could try to retrieve the truck! Patrick

Congratulations on your purchase! Cecilia is a beautiful boat!

If getting from the factory, I wonder if you could tow your boat up with one of your old tanks removed. Then you could take the new tank for that side of the boat out and try it on for size. That way you would know if it fits or not. I bet they would do that for a C-Brat, they're pretty darn...

Yes, sorry for the delay. The rear height of the tanks in my boat are 12".

SSOBOL, You are correct on adhering starboard, I stand corrected. This product will work G Flex 650 https://fiberglasssupply.com/8oz-kit-g- ... st-system/

I have read that starboard does not work as epoxy will not adhere to it, thus thus the suggestion of using pvc lumber available at home depot or lowes. I overdrilled, filled with epoxy and inverted ss machine screws into deck and reinstalled the bulkhead piece that previous owner installed. The...

Duplicate

I have a 1987 Cruiser and the tanks were replaced with the Moeller tanks you wanted, but couldn't get, before I purchased. One thing you want to make sure of is when you remove the current brackets screwed into the deck is to seal those with epoxy. You might want to test out the holes to see...

Yes, I've heard that Moeller mistakenly threw away the drawings, plans, molds when cleaning up the plant. Too bad. Are your tanks servicable? I'd imagine new ones are pretty expensive now.

I will take them!

First of all, I see that you too, have had the boat bug for awhile. That's a good thing, of course. I have a Suzuki 9.9 with both electric and pull start. Can use to troll or get home. Also had a Tohatsu 9.9 with both from above on another boat.

Hard to find a 1/2 day charter anywhere in Washington. Halibut are not easy in Puget Sound or the Strait of Juan de Fuca. All Star Charters in Everett is good. R&R Charters in Anacortes. You may want to consider a ling cod charter instead. Best of luck!

Perfect rig for camping and boating!

Here is a link to what you need for your AC: https://www.microair.net/products/easys ... nditioners

You could build one from stainless steel railing and fittings available at a marine store. I have built a couple use 3/4" PVC pipe and glued wood dowels inside to stiffen up the PVC. Then I paint it to keep the UV down to a minimum. Here's a shot from our first 22 Cruiser...

I went and there were lots of boats. About half the number of vendors than in past years. Deals on boat? Not so much. There was a beautiful teal Tomcat there. Almost $200K. I'm sure you'll find a good deal on nice boat this spring or fall.

This has been a very worthwhile topic. It would be great to make the final few entries "sticky" so that others may learn the correct procedure for trailer tire inflation.

Yes, you are correct, that is for 1,880 lbs per tire, so approximately 7,500 lbs total. What is the maximum inflation stamped on the sidewall for, I'm assuming, your Goodyear Endurance ST tires? 40 PSI seems low to me. I would probably go with closer to the Maximum inflation for each tire...

Here's a link to a prior discussion in 2020 on same subject: http://www.c-brats.com/viewtopic.php?t= ... c&start=15