Search results

  1. Lowrance LCX-113C HD Sonar/GPS Chartplotter

    Lowrance LCX-113C HD Sonar/GPS Chartplotter

    Lowrance LCX-113C HD Sonar/GPS Chartplotter
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Lowrance LCX-113C HD Sonar/GPS Chartplotter installed (mounted flush - more stable) along with Richie compass.
    • Category: Nyanza - Electronics/Helm
  2. Lowrance LCX-113C HD Sonar/GPS Chartplotter installed (mounted flush - more stable) along with Richie compass.

    Lowrance LCX-113C HD Sonar/GPS Chartplotter installed (mounted flush - more stable) along with Richie compass.

    Lowrance LCX-113C HD Sonar/GPS Chartplotter installed (mounted flush - more stable) along with Richie compass.
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Lowrance LCX-113C HD Sonar/GPS Chartplotter installed (mounted flush - more stable) along with Richie compass.
    • Category: Nyanza - Electronics/Helm
  3. First Aid kit secured to Port in-side hull with Velcro stips

    First Aid kit secured to Port in-side hull with Velcro stips

    First Aid kit secured to Port in-side hull with Velcro stips
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Fire extinguisher installed on port side of rear door - used the screw from the window frame.
    • Category: Nyanza Modifications
  4. Pads glued on to keep the cutting board in place while underway

    Pads glued on to keep the cutting board in place while underway

    Pads glued on to keep the cutting board in place while underway
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Inspired by others - galley rack made with 2 1/2" wide oak with two 3/8" dowels running the length.
    • Category: Nyanza - Galley rack/surface
  5. Cutting board and non-skid padding for top of the Wallace

    Cutting board and non-skid padding for top of the Wallace

    Cutting board and non-skid padding for top of the Wallace
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Inspired by others - galley rack made with 2 1/2" wide oak with two 3/8" dowels running the length.
    • Category: Nyanza - Galley rack/surface
  6. The public dock at Riverplace Marina - City of Portland in the background (typical Oregon overcast sky)

    The public dock at Riverplace Marina - City of Portland in the background (typical Oregon overcast sky)

    The public dock at Riverplace Marina - City of Portland in the background (typical Oregon overcast sky)
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Tied up at Willamette park
    • Category: Nyanza - Adventures on the Willamette/Columbia
  7. Three battery VSR Cluster - located in the transom - assessable through the port lazarette.

    Three battery VSR Cluster - located in the transom - assessable through the port lazarette.

    Three battery VSR Cluster - located in the transom - assessable through the port lazarette.
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Three batteries (installed by the dealer) two starting batteries (34M Optima) and one 'house' battery (D34M Optima) located beneath the port forward dinette seat - behind the refrigerator.
    • Category: Nyanza - Electrical/Batteries
  8. M

    Fix for Leaky Hot Water Shower Faucet

    We also had problems with the shower faucets leaking - in fact, one hose came off under pressure. Fortunately the dealer rep who happened to be in the cabin at the time, heard it come off and turned off the water pump before too much leakage had occurred. The dealer's remedy (Sportcraft...
  9. Shower hoses (under galley cabinet) showing new fittings

    Shower hoses (under galley cabinet) showing new fittings

    Shower hoses (under galley cabinet) showing new fittings
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Our new boat!
    • Category: Nyanza II
  10. M

    Their little secret!

    As always - appreciate all the great information on this site. I'll definitely use ss in any fittings on the exterior of the boat and most likely on any new projects in the cabin - but won't stress on any of the existing interior hardware other than to periodically coat with WD 40 or some type...
  11. M

    Their little secret!

    At the risk of demonstrating (once again) :? my inexperience with boats - how essential is it to replace any non-ss brackets/screws used inside the cabin (particularly if the boat will spend most of its time in fresh water). Thanks
  12. M

    Lest We Forget ... DaNag and Tyboo

    Agreed!
  13. M

    Managing TC-255 storage problems

    Very cool - well executed.
  14. M

    New C-Dory 29'

    Thanks for posting the pictures - it looks a lot better sitting in the water.
  15. M

    New C-Dory 29'

    Is there any rumors of an R-29? A 29' Ranger tug may make more sense than a CD-29.
  16. Camper-back top in folded/stored position with hood.

    Camper-back top in folded/stored position with hood.

    Camper-back top in folded/stored position with hood.
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Rear view of new Camperback - several panels for flexibility.
    • Category: Nyanza - Camperback
  17. M

    (Soon to be) TC New Owner

    Let us add our congratulations to your new purchase! We are new TC owners ourselves - still in the process of having the boat outfitted and are very happy with our boat. We have the Lowrance LCX-113C - the GPS hasn't been installed yet - we have a few glitches we need to work out, but the...
  18. Gray in-door/out-door runner from Home Depot - minimal trimming needed

    Gray in-door/out-door runner from Home Depot - minimal trimming needed

    Gray in-door/out-door runner from Home Depot - minimal trimming needed
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Fire extinguisher installed on port side of rear door - used the screw from the window frame.
    • Category: Nyanza Modifications
  19. 2nd fire extinguisher added to port bulk head inside the berth - screwed to piece of oak glued with 5200.

    2nd fire extinguisher added to port bulk head inside the berth - screwed to piece of oak glued with 5200.

    2nd fire extinguisher added to port bulk head inside the berth - screwed to piece of oak glued with 5200.
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Fire extinguisher installed on port side of rear door - used the screw from the window frame.
    • Category: Nyanza Modifications
  20. Removable dish rack - made with sheet of oak and eight 3" pieces of 3/8" dowels

    Removable dish rack - made with sheet of oak and eight 3" pieces of 3/8" dowels

    Removable dish rack - made with sheet of oak and eight 3" pieces of 3/8" dowels
    • mark&diana
    • Media item
    • Comments: 0
    • Album: Inspired by others - galley rack made with 2 1/2" wide oak with two 3/8" dowels running the length.
    • Category: Nyanza - Galley rack/surface
Back
Top