Search results

He did use the Bimini frame I had, but had to add in more pieces and redid the mounting points. We ran with the side curtains and back panels down in our two month , ocober and november cruise from Evansville , In. To Panama City , Florida. We are looking for a three month cruise around...

$3200 Canvas Creations , Atlanta , In. Central Indiana. Going to see if he will make screen panels

I mounted our Gen 2 starlink on the rail with a mount ordered off Amazon. Ordered a power converter off Amazon 12volt / to 48volts We power it off our solar battery. Already had the $165 roam plan . Just got done going from Evansville, In. To Panama City ,FL. Only had to ajust the SL a...

No switch. It is automatic . Checked every fuse in the fuse block behind the helm . All good .

I checked every fuse on the fuse panel behind the helm . Meter read 12 volts . I don’t understand that at night I put a weight on the blue magic and in the morning removed it and the pump would not run . Do you know what fuse goes to that pump ? Where do the two black wires for the blue magic...

I heard my shower box pump running on and on last night so opened it up and it was on but not pumping. Marina I am at had an automatic one I bought. When I check the voltage thru the brown(+) and black (-) and if I wire the blue magic switch wires together I get 1.7 volts. If I unconnected...

I am very interested in Johnathan Arthur's trips . Yet your link goes no where. I am starting the loop in a few weeks and would really like to read his story .

Please post an update when installed.

This lost is timely. I am wanting to replace the rode and chain on my c25.

Do you have a link for the one you purchased at HD?

Excellent upgrades!

Awesome! Thanks for replying!!

Older thread but do you have a link or pictures of the risers you used?

Thank you! I will check mine today.

I removed the rivets ,most were broken off anyway. The rivets use a steel mandrel. Bound to fail sooner or later. Also riveted from the inside. Poor design in my opinion. I Drilled the holes out with a 1/4 drill bit . Used 1/4 stainless steel bolts from the outside. Lots of 4200...

I ordered from Lisa at Ultimate passage. Good pricing.

I drilled all mine out and replaced with stainless steel 1/4 bolts. I filled the slit with 4200 and put big blobs of 4200 at each bolt hole. Rubber fit fine when reinstalled.

Any update?

I am wanting to replace my scuppers on our 2003 C25, as the rubbers have curved out and the white plastic has deterioted. What ones do you recommend? I read thru 3 pages using the search term "scupper" and did not see a consensus. I did see a thread from 2010 where there was a angled...