Search results

I just purchased an EZ loader for my new CD 22 from NMI. It has bunk boards rather than rollers. If you contact Northwest Marine Industries they should be able to provide you with the information on how to set it up and may be able to provide you with the hardware or how to get it from EZ...

Thanks everyone for all the good ideas. If my corrugated plastic panels don't work out I now have possible solutions.

Rob, I agree with you that most calculations don't take into account all of the externals, and I was not trying to do a complete energy comparison between the electric outboards and gas ones. There are many factors involved, but in general I can say that here in the Pacific Northwest electric...

window covers

I was unable to find any pictures of folks who have installed curtains in the 22.  Since we will be living in the cabin we definitely need some protection over the windows while we sleep and to keep the marina lights from shining in.  I tried some curtains but found they hang down away from the...

The comparison is for total energy use and I did not try to compare it with any specific outboard. The numbers represent the actual amount of energy I need to move my boat. It includes all the energy losses in the motors, props etc. If you want a comparison to a regular outboard, here is an...

As a scientist I like to collect data and play with numbers. Now that I have data from two electric boats (a 26 ft St. Pierre dory and my new C-Dory 22 cruiser) I want to share some comparisons between electric and gas. At 5mph my C-Dory uses 1600 watts (going with a tide of about 1/2mph) to...

What is the best covering for bunk boards on a trailer? Is it carpeting or HDPE slicks? My new trailer that came with my new C-Dory has carpeting, but I would like to know what other folks prefer. The little research I did on the web suggests carpeting is better for fiberglass bottoms because...

P.S. If you buy it from NMI they can set it up to exactly match you boat so you won't need to make all the necessary adjustments that come with buying a new trailer. Also they prefer bunks and carpeting. That is what they set up for me.

I suggest contacting Michael Millison at NMI. They provide E-Z loader trailers for their new C-Dories and can help you figure out what you need (as well as potentially selling you a new one). I just bought a new boat and trailer from them and thought their price for the trailer was reasonable.

starboard side set up for cruising

helm seat on starboard berth

adding a berth platform on starboard side

I am still having trouble accessing the anyone's pictures. Is there something I need to do at this end to reset my computer? Thanks

Yes, I have also been having problems with the pictures in the album. All I get is a square with the legend, but no pictures. This has been a problem for the last three days I have tried to access my pictures.

It was quite windy and the wind was "boxing" the compass from W to SSW and back, so I could not collect more detailed data. This often happens in Budd Inlet in Olympia WA because of the land. The data I graphed was in a strong chop with the wind coming at the boat between 10 and 12 on a...

I finally got all the wires hooked up correctly and was able to take our new C-Dory 22 cruiser for its first run. I was windy in Budd Inlet (15-20 mph) but we were still able to get good data on performance. At 5mph we were using 1600 watts, so at that speed I would have a range of about 45-50...

power vs. speed

first cruise

The motors I have are 3kW each. They do however, look the same as the 6 kW models since they have the same motor cowling. Based on my calculations and experience with my St. Pierre Dories I believe I only need about 6 kW to reach hull speed. However, I usually cruise at about 5mph and to get...