Search results

I think I am going to go your way....Just can't bear to part with $500 to $600 for a 20-gal bladder when four 5-gal general purpose cans from the neighborhood hardware store will be literally a tenth of the cost.

I'm thinking about installing a little fridge on my 22' that draws 3 Amps at 12VDC but don't know whether to upgrade my house battery. Has anyone measured the power consumed over a 24h period to know how many amp hours it would draw at a given air temperature range?

Hello, I'm interested in extending my cruising range through a collapsible fuel bladder and am seeing models from Imtra, Turtle-Pac, and others. Does anyone have experience with a specific brand that you'd recommend?

Hi folks, wanted to close-out this topic. Since my original post, I engaged Raymarine customer support, who initally blamed the GPS manufacturer (Garmin), then had me send the unit back to Raymarine. Raymarine declared nothing wrong with it and sent it back. I've re-intsalled it and wanted to...

For those of you who are pleased with the operation of your Raymarine s1000 autopilots, am wondering if you could tell me the following settings for your unit: Rudder Gain? Counter Rudder? Response? Auto Trim? Rudder Deadband? Hardware/Software Version? My new unit will hold a course ("Auto"...

Hi folks, I know that the Raymarine S1000 autopilot is discussed extensively in other threads, but I still don't understand how to make the data wiring connection between the Raymarine unit and a 3rd-party GPS (Garmin in this case). The Ray has 4 wires for data (power is separate): -ve out +ve...

All, sorry to say that I won't be able to make it this weekend. My wife and I are in the middle of a do-it-yourself remodel and are way off schedule. Have a great time and don't sweat the locks.

Hi folks, I've been busy at work and haven't seen this thread in about a week, so let me clarify a couple of points about the locks: 1) I am stopping by the dealer according to whatever the schedule is, so if you'd like to skip the dealer and go straight through the locks, go for it! If you're...

It's snowing here in Magnolia about 600' up so I went to Ballard to check on the Jenny G but it's just sleeting along the ship canal. She did have a bit of ice on deck but nothing scary. Shore power and heater are fired up just to keep the chill off of her.

Pat, I agree with you wholeheartedly on the tabs. I was a little nervous about how spendy they are but have really enjoyed them, initially for the speed increase in smooth water but now also for the increased comfort in the moderate stuff. I would say that anybody getting a new 22' should just...

Since the ride of the C-Dory hull gets mentioned from time to time on these forums, I wanted to comment on it to the many prospective buyers who patrol this site to learn about the boats. First, there's calm water. Any boat does well here and the C-Dory is no exception. Initially, I wished for...

I would second Pat that Bell Harbor Marina is an excellent choice if you're venturing through the locks because all of downtown Seattle will be at your doorstep. Shilshole Marina is also available and much closer...probably a half mile from the saltwater side of the locks.

Since you're all trying to figure out the timing of things, I kept my GPS on today for our tour of the ship canal and down the Western shore of Lake Washington. Here are a few reference points: Locks to Sea Ray dealer: 39 min @ 5mph Webster Point to Sea Ray dealer: 32 min @ 7mph Webster Point...

The Lizzie near the Ballard Bridge

A couple of thoughts for those locking through because it sounds like this might be your first time: 1. It is highly likely that you'll come into the small lock. There are two rows of bollards on floating walls that line either side of the small lock. The lower bollards will be perfect for your...

Joe - I'm talking about #1: making the repair on land, letting it air dry, then having it be underwater when the boat is in the water.

With all of the debris floating around in Puget Sound I've already managed to tag my transom-mount transducer and break the flange of the plastic bracket in which it fits. Last night, a failed superglue attempt let me know that I need something more serious. Should I use...