Search results

Ya, I kinda figured that it had jumped the stop - and - since it is a sealed unit (glued) it may be non repairable, but I'm tryin' ! Of course the next question that begs to be answered - why would it jump the stop ? I don't really need the WP gage, but since it's there, it may as well work. I...

Does the 150 Honda have the same engine computer as the automobile (with different settings) ? Where is the port located ?

My water pressure gage has not worked since I bought the boat. The pointer was pointing straight down. Yesterday I decided to dig into it. I pulled the line line fitting off of the engine and blew into it - nothing. I then hooked the compressor to it, still nothing. I disconnected the gage and...

Jay, where is your water fill ? Anyone with an '06 KNOW where there tank is ? Is the '06 the same as the '05 ? 'As The World Turns' so do the the questions arise. :P

Course if you're not like Capt. Jim and can't tie a knot (like me), tie a LOT ! This over under around and through always threw me - I did get the rabbit out of the hole - around the tree - and back in the hole down pat.

Good idea on the head - IF it works well on the pot. water, I may do the same.

Boris, was your under berth foam filled ? How did you figure out the tank was centered instead of on the port side ? I ordered the 8000T Digiflow from here - http://tinyurl.com/27vsm33 appears to be the same as the 6000, except for a single filter. If it works, there will be another in the...

You win 50% of an Attaboy Boris ! :thup :thup The other is for the macerator thru hull. SHE doesn't like holding the hose, and doesn't understand the complexity of one valve and a switch !

Here's my best for under $20 - can anyone I.D. them ? http://picasaweb.google.com/river.rd/CDoryStuff#5465000453199908210

All of the level gages and sight tubes are well and good - if you can find your tank ! On my 25 it is in the bow, probably on the port side. The entire area under the v-berth is foam filled, the only reason for that, on this boat may be noise reduction or MAYBE so it will rest on it's stern if...

I like the looks of the first, but the specs of the second seem to meet our need better.

Is the cross member you added the roller to Aluminum ?

I also like the turnbuckle idea - gonna have one ! Trying to figure out how to get a roller under the bow now.

A note here - Kettle Falls now has a mechanical portage around it (flatbed trailer as I understand it) I've emailed the Ranger at Voyageurs N.P. and Kettle Falls Hotel to see if they can handle a 25', both feel sure, but have no experience with one that large. The Ranger says their 23' patrol...

Maybe of some use - for some. http://www.teex.com/teex.cfm?pageid=media&area=teex&templateid=23&storyid=990

Kool Moose, if you squint it does kinda have a C-Doryish look !! I think, since there are no moose in East Texas, that a lot of folks must be religiously hunting them here also. There's ALWAYS some in Wally World dressed in Camo !

Ya, I have a 3" strap running down from the bow eye, but the arc of the end of the strap is to flat to totally stop any side - side movement. I don't have a bunk under the bow that the strap pulls down against, and I believe that is the problem. As I said earlier, with the winch strap tight...

Cold Pizza - without the Anchovies I reckon, huh Jim ?

Looking thru the photo album for Get~Aweigh, came across this one - http://www.c-brats.com/modules.php?set_albumName=Installing-the-Electronics&id=Finally_home_005&op=modload&name=gallery&file=index&include=view_photo.php My 25 also want to do the same,but I prevent it by cinching the winch...

Those in the second photo are for the white anchor/nav light, you did get the light? The other ???