Search results

Just my own opinion and possibly overkill but I like to know where I am when I start out on something. I would change out the water pump kit and save the removed impeller for an emergency. Generally, if the rubber is not cracked, checked, and will regain its original shape (ie the legs...

I was asked by a friend who inherited the boat to help him fix his kicker motor. The situation is this; The motor is a 2016 T9.9 Yamaha, electric start, hydraulic tilt. The boat sat outside for a couple of years with the kicker motor in the tilted up position with the tiller arm up (and...

Here is another link that may help you identify your motor. You have to know a little about your motor to identify it, shaft length, remote control, eic . Once you've determined the model # then you can search the parts catalogue for a replacement. Hope this helps...

This is a example of what you get when you google identify model no of Honda outboard Honda Model Identification... BF2 Manufacturer Horse- power Model Year Shaft Length Steering System Market BF = Honda EX: 2 DX = 1999 DY = 2000 D1 = 2001 D2 = 2002 D3 = 2003 D4 = 2004 D5...

More info may help in identifying your boat to begin to be able to give a value. I wasn't aware that they made a 29' Venture. I thought that 26' was the largest Venture. Anyway more info would be helpful, such as year, electronics package, trailer, canvas, etc, etc.

JKSWOR, I did the search of the 'dry bilge system' and saw the video of the entire assembly. I see you have a 25' the same year as mine and I am wondering how this set up works. It seems to be a fairly low volume set up using a small diameter clear plastic tubing. Do you use this in addition...

Your link is active and working in the 1st post. This is a very nice looking 2009 25' Cdory with nice upgrades including the dingy and 5hp Tohatsu, led lights conversion, Manson supreme anchor and chain, auto pilot and more make for a really nice cruising boat at a competitive price range...

I also agree that a dielectric grease is the proper way to attempt to reduce corrosion. It would also be a good idea to have that cleaner to clean out the dust/grime build up occasionally. The idea is to prevent salt water from contacting the electrical conduction areas and the grease will be...

Sometimes it is cheaper to just take it to the shop and have them plug it in to identify the problem. Might have saved you buying new filters and plugs. I suspect it is some electronic sensor that is giving the motor signal to shut down. How long is the initial break in oil supposed to be...

Would this be use while at anchor or underway? From my personal experience with the 25' i'm not inclined to allow anybody on the bow while underway as it creates a possible safety hazard. There are too many unexpected instances which require immediate response from the pilot possibly throwing...

We've had the Sea Witch since May of 2021 and have used the Wallace stove a fair amount mostly as a heater during the shoulder seasons. When I brought the boat home I went through every system on the boat and tested the operations of each. When it came to the Wallace stove I replaced the fuel...

Hunter, I don't have a 22 but have had a 65qt RTIC cooler that was a knock off of the YETI. You could jump up and down on it, a beast for sure. Good if you keep them full and aren't getting in and out of them often. You should easily be able to find them online. Good luck.

Thanks Jody, that looks very similar to mine. I've got the faceplate but not the bottom plate or the dividers.

Thanks Patrick, I saw that one and it looks pretty close. The netting on that could be changed to put in the hard front retainer wall from the original inserts. I'll have to check the measurements for opening on the existing set up. That is where I store my 15lb downrigger weights when not in...

Thanks for the replies everyone. Steve I am unable to post a picture of the insert at this time, but the picture in Colby's post is as near as I can remember identical. I'm not sure of the measurements at this time either. Colby, I will check with NMI and hopefully come up with a solution...

I have a 2007 25' and have decided that I would like to replace the cockpit bulkhead plastic molded inserts that are use for rod holders, deck brush etc. Does anyone know where I can order these from?

I would definitely go talk to another fabricator. The folks that make canvas enclosures are proficient at bending tubing tubing to various hull configurations. The bending dies are fairly standard so anyone with a background in tubing bending should be able to match what you have. If you...

Congratulations on you getting a 22. I guess my question would be how did the cabinets bottoms get rotted? It may not be a big deal but I believe I would check the deck for signs of rotting also. Hopefully it is isolated to the cabinets only. No matter there is plenty of resources within...

I'm not so sure this boat is at all in the same class as a CDory. A beautiful boat for sure. As far as trailerability, I'm going to give it a failing mark. After having owned an Atlas Acadia 25 with a full keel, I assure you that this boat will have to be on a pretty tall bunked trailer to...

Wallin, the 25' that was on the 20th I believe is in Santa Rosa, Ca. Looks like a good one from the description given. I also have a 25' 2007 vintage. Just a little advise on trying to land a 25. They tend to go fast when listed. Have cash ready, get the boat tied up for with survey or...