Search results

I would think steelerubber.com would have that.

Thank you! I will move it to the starboard side and move at least one of the batteries to the port Lazerette.

My boat came with a 9.9 kicker mounted on a Garelick bracket port side and 2 batteries in the starboard lazarette. I have removed the bracket and purchased a Mini Jack. The problem is if I mount it back on the port side, the tiller will hit the side of the splashwell. I see pictures in the...

I ordered new logos from the factory. Little expensive but they were same as the originals.

I would try Steele rubber. You can send them a picture with dimensions and they can usually match it up. Good luck

You could check out the Gaye n Robert you tube channel. I believe that’s what they tow their 22’ cruiser around with.

I went thru and replaced the rubber/mohair channel.it wasn’t to difficult I got the material at steel rubber products.

We actually just got home this evening from 5 days of fishing in Astoria oregon and launched are 22’ cruiser with a dodge 3500 and Arctic fox 990 ever day we were there.I have Torklift fastguns to secure the camper with a rubber bed mat and I do have a block of wood to put behind the tire when I...

Silverdale WA Costco is selling unlimited BoatU.S. membership for 114.00.

I noticed in the comment section they said it weighs about the same as plywood and coosa board

We stayed at Alder bay a couple of summers ago and can’t say enough good things about them. If you are leaving your truck I believe you would be parked right in front of where the managers live. Boat ramp was good enough that I launched with my truck camper on. Telegraph cove was nice to just a...

During my project of repainting and replacing the rubber seals on my windows I replaced the felt track. Slides much easier now.

Count us in. Thanks Steve and Jodi

Never thought about the Port Townsend lifts I considered them more of a maintenance yards. I am going to be getting a new trailer in the next year and I was interested in that option So I called them and they will lift your boat of the trailer for 7 dollars a foot one way.

I know of no sling launches on Hood Canal. There used to be one at Seabeck but was removed several years ago. The closest would be Edmonds or as Bob says launch in Lake Washington. I live 5 minutes from Salisbury Point boat launch that is right next to the bridge you are more than welcome to...

That was a great article. Thanks for sharing

I think I would remove the rubber insert on the rail and take a look at the condition of the rivets. If you have a few leaky rivets you most likely have some that are not far behind. Insert is fairly easy to place back in. I soaked the rubber in warm water before placing it back into the...

The part # I used for my back window and door was 70-3814-357. I talked to Todd at Steele rubber 1800 447 0849 extension 211. If I lived close I would remove the seal and have them match it.

I have a 22’ cruiser. To the top of the grab rails on the roof Is 7’11” to the top of the radar is 9’4”. We have a 12’ garage door it fits our boat or truck camper nicely. I did have to install a swing tongue on the trailer for length.

I just replaced some of the rubber seals in my Windows. I got the replacements from steele rubber products sent them a picture with the measurements to get correct ones.Also I bought small plastic tool from them that made it a lot easier to get the seals in. The one window I Removed from the...