Search results

  1. C

    screeching when lowering motor

    i already put grease on the tips of the rods because it looked like there had been some there and dried away.. thanx for input, just didn't want to have a big problem happening if i didn't address it will have to see how it does now.
  2. C

    screeching when lowering motor

    we have developed a high pitched screeching sound when the outboard goes down about midway along, doesn't do it everytime though. we greased the fittings for the steering shaft that is full. was wondering about the trim hydraulics, could that be the problem.. the sound is a metal sound like an...
  3. C

    gelcoat help

    i used 3m restorer and then cleaner wax looks pretty good , thanx for advice
  4. C

    C-Dory Burgee Order!

    don't know what all the fuss is about, before my time, argghh..we be flying our "jolly roger"
  5. C

    gelcoat help

    last year we scraped against a boat which put a scratch mark on our green trim, although we think that it is varnish from their wooden rub rail, you can barely scratch a little off with your fingernail but is VERY hard, does seem to be on top of our gelcoat. i don't want to make it worse, some...
  6. C

    gear oil drain seals

    i think there was mention before about putting new screw seals on when you change gear oil. so we bought new seals and they look like plastic discs the original ones are rubber, that seem to fit in the bottom threads of the screws . what's the consensus on replacing the year old originals...
  7. C

    Enzymatic fuel tank cleaner

    we had just bought stabil at west and the salesman suggested the startron with recommendations from a friend, we decided to ask our cdory dealer, they had bottles sitting on there counter, recommended it over stabil..which they told us to use when we bought our dory so... we purchased startron...
  8. C

    leaking at step edge of potti area

    well c-pearl is at the dealer presently and they said they found our leak to be with the anchor locker drain as well, when i had looked in there before taking her back i noticed that there was no tube just a hole drilled thru and the clam shell put on outside, i could also see what looked like a...
  9. C

    leaking at step edge of potti area

    On our vacation 5th day on boat we are finding carpet wet found small streaming leak coming out where the rough glass meets the smooth glass at the step edge it only comes out when we are cruising and the boat is angled. now are wondering if it is migrating from rub rail somewhere down in front...
  10. C

    gelcoat advice

    unfortunately while temporarily rafted to a sailboat a wake threw us together and we found what looks like paint or wax scraped onto our green trim, it feels like it is on top of the gelcoat you can scratch it and some comes off but is very hard. any advice on a product or method to fix this...
  11. C

    water in fuel

    ok this day went down hill fast.. last weekend everything ran fine and today shortly after leaving the marina, dogging sputtering and running rough and unevenly so go back check the seperating filter and voila there is water! we have had the same gas for about 3-4 wks and have been at about 1/2...
  12. C

    name plate over cabin door

    well a friend gave us a nice name plate that would look great outside the cabin door. the skipper wants to unbolt that piece above there to be able to put nuts behind the screws to secure it. any thoughts on that or has anyone screwed anything into that piece.. it seems like it's made out of the...
  13. C

    06/02 - 06/04 - Lankford Bay Marina, Eastern Shore

    well, it was our 1st time with the group but had a really nice time.we had some time to ourselves as well went into rock hall( i do think though a lot of businesses seemed to be closed?? oh no!!) so it seems that dory owners are just plain "rightfolks" and how cool was it to see all those...
  14. C

    06/02 - 06/04 - Lankford Bay Marina, Eastern Shore

    Does anyone know how they are assigning slips--first in or already designated?? also could someone summerize the basics for the newbies: covered dish get together fri night right? shirts are $15? anything else ? thanx
  15. C

    06/02 - 06/04 - Lankford Bay Marina, Eastern Shore

    Just wanted to thank you for sending the attendance list to us. cpt vic & the skipper
  16. C

    outboard engine flush

    well here's what we were told.. rob atcutter told us that we should flush intermittently through out the season. getting an attachment that fits in at top of motor and then lower the unit( it can be in water) and run with hose it will discharge in the water and flush out all sediments and salt...
  17. C

    new windows- issues

    took our new 22 out in some rough water yesterday, handled good but we have some dripping around several window frames. even if water can get into the outside drains i wouldn't think it should be able to migrate into the cabin.. also slider latch onport side came loose. this is brand new., does...
  18. C

    06/02 - 06/04 - Lankford Bay Marina, Eastern Shore

    I noticed your post before cause you're from pa. where is montoursville? is it? there aren't many brats from pa, i know there's one in red lion. we are southern lanc. co. 45 min ride to our marina!!! see you in june :)
  19. C

    06/02 - 06/04 - Lankford Bay Marina, Eastern Shore

    okay here goes: C-Pearl will be arriving fri, leaving sun. we will be cruising and do not need ramp or parking shirts- 1 XL & 1 med reservations all set closer to june will there be a list posted, i can't seem to download the one in documents ?? am having issues with internet...
  20. C

    06/02 - 06/04 - Lankford Bay Marina, Eastern Shore

    Question for whom ever is getting the shirts..are they going to be pre-shrunk or just cotton do you know yet. Does have an effect on the size we might need. If you won't know in advance could you just let me know so I can compensate, thanx cpt vic
Back
Top