Recent content by easternshore22

For people cruising the Chesapeake Bay in May, you can visit Cambridge MD and stay for free Friday and Saturday nights at the municipal marina: http://www.dorchesterbanner.com/leisure ... c.facebook

I have a '96 Angler and has the same steering wheel and door (mine was painted white). Franco

Marc, The shop manual says to inspect periodically and replace every 2 years on page 0B-1. On page 0B-14, specifies the lines and locations. My dealer told me that if I do not follow to the letter that table I would be out of warranty. It did not matter since the problems started 1 month after...

Thanks for all the replies. I agree that the filter issue is due to ethanol and low hours, but the bush I do not think it is an ethanol issue. The part that I found in the high pressure filter seemed to have been cut off the bush, similar to the lateral cut you see in the picture. It does not...

Pictures:

IMG 4037

IMG 4036

High pressure filter and some quality parts

Thu Aug 20 23:15:42 2015

Low pressure fuel pump and rubber

Hi, Last year I had a problem with my engine stalling (post: http://www.c-brats.com/viewtopic.php?t=22040). That time the engine with 120 hours would stall, but would restart after priming with the bulb. The issue was a piece of rubber not allowing one of the valves in the low pressure pump...

I want to give an update/closure on this. After replacing every component between the low pressure filter and the tank, it still stalled. I decided to replace the low pressure fuel pump. That fixed it. It took less than 15 minutes and it is a $95 part (from iboats.com). Since I was replacing...

I have permatrim in my Suzuki 90 (22 angler). For controlling the stern and bow lift is an excellent addition. If you need to have lateral control, the trim tabs are better on a single engine, but I believe you can achieve the same with permatrims in a twin installation. With permatrims you...