Search results

For people cruising the Chesapeake Bay in May, you can visit Cambridge MD and stay for free Friday and Saturday nights at the municipal marina: http://www.dorchesterbanner.com/leisure ... c.facebook

I have a '96 Angler and has the same steering wheel and door (mine was painted white). Franco

Marc, The shop manual says to inspect periodically and replace every 2 years on page 0B-1. On page 0B-14, specifies the lines and locations. My dealer told me that if I do not follow to the letter that table I would be out of warranty. It did not matter since the problems started 1 month after...

Thanks for all the replies. I agree that the filter issue is due to ethanol and low hours, but the bush I do not think it is an ethanol issue. The part that I found in the high pressure filter seemed to have been cut off the bush, similar to the lateral cut you see in the picture. It does not...

Pictures:

IMG 4037

IMG 4036

High pressure filter and some quality parts

Thu Aug 20 23:15:42 2015

Low pressure fuel pump and rubber

Hi, Last year I had a problem with my engine stalling (post: http://www.c-brats.com/viewtopic.php?t=22040). That time the engine with 120 hours would stall, but would restart after priming with the bulb. The issue was a piece of rubber not allowing one of the valves in the low pressure pump...

I want to give an update/closure on this. After replacing every component between the low pressure filter and the tank, it still stalled. I decided to replace the low pressure fuel pump. That fixed it. It took less than 15 minutes and it is a $95 part (from iboats.com). Since I was replacing...

I have permatrim in my Suzuki 90 (22 angler). For controlling the stern and bow lift is an excellent addition. If you need to have lateral control, the trim tabs are better on a single engine, but I believe you can achieve the same with permatrims in a twin installation. With permatrims you...

Update: I connected an external tank directly to the low pressure filter using the bulb of that tank (no components in common with the boat's fuel supply setup). I did not run it like this for long since I did not want to run without the 10 micron filter. It run fine. The filter maintained the...

Probably you solved the issue there. If you sucked the obstruction out of the tank, it is probably a permanent solution, if the obstruction fall back to the tank, you will need to clean the tank. That is what I will do with mine once I take the boat out of the water since part of the pickup is...

Thanks everyone for the help. This is a great site! I looked at the bulb and it was pointing down. I changed the layout to point up. I also checked the pickup line of one tank and it came out. It was all brittled. I guess they were built before ethanol and after 18 years they reached the end...

Thanks everyone for the answers. All the lines, 10 micron filter and bulb are new from west marine. Since it is an old boat I started with that. One more detail, the engine has 150 hours. Does the position of the bulb really matters (I mean pointing up or down)? I never heard about that, but...

I am having problems with my outboard that is driving me crazy. Symptoms: Engine stalls idling, going at cruising speed or at WOT, Can be 2 minutes from starting or 15 minutes. Engine stops, beeps twice (indicating stalling) and no error codes in diagnostic screen. I squeeze the primer bulb a...