Recent content by AnchortownJim

  1. A

    2003 C-Dory 22 Cruiser - $35,000

    Coho has been sold. She went to a very nice family who will love her like we did.
  2. A

    2003 C-Dory 22 Cruiser - $35,000

    Coho is for sale. 2003 Honda 90 with about 400 hrs, with service manual 2003 King dual axle trailer w/surge brakes, spare wheel & tire Spare prop, nut and washer Garmin GPSMAP 840 Chart plotter Garmin GMR 18xHD Radar Standard Horizon VHF radio w/DSC and external speaker Flowmaster fuel...
  3. A

    v-berth sleeping - which way

    We always sleep with our feet forward and our heads aft. Much more comfortable.
  4. A

    Fuel Tank Capacity

    For the record, my 2003 22' Cruiser has two, 25 gallon Moeller tanks.
  5. Step One remove the pin.

    Step One remove the pin.

    The Trim Master trim tabs are easily repaired if the actuator seals start to leak. Removing the end cap is greatly facilitated by using the OTC Adjustable Gland Nut Wrench #7463 available at any NAPA autoparts store. I did not put a 1/2" socket wrench on the Gland Nut Wrench, hand force was...
  6. Step Five, reassemble in reverse order of disassembly.

    Step Five, reassemble in reverse order of disassembly.

    Step Five, reassemble in reverse order of disassembly.
  7. Port Trim Tab repaired and no longer leaks.  Total cost of U-seal $5.35, having a trim tab that no longer leaks, priceless!

    Port Trim Tab repaired and no longer leaks. Total cost of U-seal $5.35, having a trim tab that no longer leaks, priceless!

    Port Trim Tab repaired and no longer leaks. Total cost of U-seal $5.35, having a trim tab that no longer leaks, priceless!
  8. Step Four, pull out the actuator and remove the top seal.  Replace with a U-seal 0.75" x 1.25" x 0.25" 800 PSI.  The O-ring was in good shape and did not need replacing.

    Step Four, pull out the actuator and remove the top seal. Replace with a U-seal 0.75" x 1.25" x 0.25" 800 PSI. The O-ring was in good shape and did not need replacing.

    Step Four, pull out the actuator and remove the top seal. Replace with a U-seal 0.75" x 1.25" x 0.25" 800 PSI. The O-ring was in good shape and did not need replacing.
  9. Step Three, continued.

    Step Three, continued.

    Step Three, continued.
  10. Step Two, unscrew the end.

    Step Two, unscrew the end.

    Step Two, unscrew the end.
  11. Step Three, remove the end and the spring.

    Step Three, remove the end and the spring.

    Step Three, remove the end and the spring.
  12. Step One remove the pin.

    Step One remove the pin.

    Step One remove the pin.
  13. The tool you need to remove the end.

    The tool you need to remove the end.

    The tool you need to remove the end.
  14. (AnchortownJim) At anchor in Hummer Bay PWS, 7/24/04

    (AnchortownJim) At anchor in Hummer Bay PWS, 7/24/04

    No description
  15. A

    Teleflex Cable Steering, FREE

    Dan, Yes, the cable is still available. Jim
Back
Top