Latest activity

  • T
    Tom Hruby replied to the thread Refrigerator.
    That is good news, but for now all of the small rv portable type refrigerators that would fit into the smaller C-Dories are out of...
  • T
    Tom Hruby replied to the thread Charging Dual Batteries.
    As Thataway said, a starting battery and deep discharge (house) battery should not be charged in parallel (both at the same time). So...
  • F
    Foggy replied to the thread Charging Dual Batteries.
    That's an engineering question. I'm not an engineer. You most likely can come close to getting your answer my digging into articles...
  • T
    thataway replied to the thread Tabbing or gel cote peeling?.
    Definately gel coat or paint peeling. It was sprayed on long after the hull was laminated to "finish" the interior of the boat. Agree...
  • W
    Wood Zeppelin replied to the thread Charging Dual Batteries.
    Yes, this raises the question, how/when does a charger know to stop charging. Does it just read the battery voltage and use that...
  • T
    thataway replied to the thread Refrigerator.
    "While headlines sound dramatic, this is not a shutdown — it’s a corporate restructuring within the same Thetford family. The filing...
  • W
    Wood Zeppelin reacted to Foggy's post in the thread Charging Dual Batteries with Like Like.
    My understanding: If the 2 batteries are identical except for a (small ?) voltage difference and are connected properly in parallel, the...
  • K
    My 22' of similar age (2008) had a similar problem on the interior. I peeled off the loose stuff and painted over the exposed...
  • P
    pcg posted a comment on the media item Hightop 12.
    I decided that while I had the roof in the shop I would go ahead and prime it for painting later. I did final sanding with 320 grit...
  • P
    pcg posted a comment on the media item Hightop 11.
    Done. Well, except for sanding and fairing. The new sections consist of two layers of 1708 with additional layers at the edges and...
  • P
    pcg posted a comment on the media item Hightop 10.
    Masonite forms in place for laying up the corner gaps.
  • P
    pcg posted a comment on the media item Hightop 9.
    Front section has been laid up.
  • P
    pcg posted a comment on the media item Hightop 8.
    Front section has been laid up.
  • P
    pcg posted a comment on the media item Hightop 7.
    I used 1/8" smooth masonite to make a curved form to close the front of the roof.
  • P
    pcg posted a comment on the media item Hightop 6.
    I built a wooden cradle to hold the roof off my work table so I could work on it without distorting its shape.
Back
Top