SOLD - 2004 16FT Cruiser - Trailer and New Yamaha 50HP

K

kcohen4

New member
Boat and Trailer are ready for the season coming up. Both completely serviced. Boat waxed. All is actually in better than new condition.

Too many items to list all.
Seems I have enough time to tinker with it, but never enough time to use it. Only went out twice last summer for lunch trips. Refinished all the burgundy trim. Time to sell and let someone else enjoy it.

In last 2 years
Re Wired all Electronics
Professionally had installed SeaDek flooring
2019 Yamaha 50HP engine and new controls -total 48 hours on engine
Teak bench seat in stern with Sunbrella cushion
New ICOM radio
Compass
Racor Fuel Filter
2 Six gal. tanks
New Nauticus smart trim tabs
New 12volt battery
Battery trickle charger
Garmin depth/speed /fish
Locking security drawer
Bluetooth speaker
Bumpers with burgundy covers
Extra Prop
Extra filters/plugs
Stainless steel skeg guard
2 Canvas covers straight down and camel back
3 brand new tires and rims for trailer
Electric Winch on trailer
Stored inside in the off season
2 anchors with chain and rode
Lots of spare parts/tools/dock lines and additional accessories.
Located in Williamsburg, VA
See picture album Annie M: http://www.c-brats.com/modules.php?set_ ... php&page=1

Price $24,000


Thanks for looking at this
Ken Cohen
 
Beautiful boat well done. Any chance the location you had install your Seadeck kept the file and would sell the material without install?
 
The company and person that did the work is:
Phillip Doggett
Canvas Innovations, Inc
4104 George Washington Memorial Hwy
Hayes, VA 23072
Cell 757 897 9002
Email hayessails@gmail.com

I have a copy of the drawings but they are too faint to copy.
You can tell Phil they did the drawing 9/24/2020. Drawn by John Brittingham

They came to the boat with a laser measuring device and I believe they sent the info to SeaDek for the drawing.
They charged $250 for the measurement but that was applied to the purchase.
Total invoice for SeaDek, Installation, measurements $1676
 
Overstock Item #17196887
I see it is on sale for less than I paid last year Now $235 + extra discounts.
It is 51" X 15" was hard to find one that size. It is well made and stays in place by itself in rough water or while on the trailer.
I got the cushion online, found a company that made one that was the correct size. Don't remember the companies name. It came with snaps sewn in and the male ones screwed into the bench. Works well.
Also works as a step into the boat
 
Back
Top