Outboard Saft Length.

C

C-Otter

New member
Joined
Nov 2, 2003
Messages
211
Reaction score
0
C Dory Year
1985
C Dory Model
22 Classic
Hull Identification Number
DOR22242H585
Vessel Name
C-Otter
From what point on a outboard do you measure to determine shaft length?

15-20-or 25 inches. Does the 22 C-Dory take the 20 inch shaft?

C-Otter.
 
Are you talking about Main Engine(s) or a Kicker?

Charlie
 
I always thought it was from where the outboard mounting bracket would meet the top of the transom down to the anti-ventilation plate. That's a good question, can't seem to find a good reference source.
 
Charlie: Im talking about the main engine for my Classic. Have a chance to buy a year old four stroke, from a out-a-town owner,but we don't know shaft length or how to measure.

The transom of the Classic is 20 inches. C- Otter.
 
C-Otter,

Yes, a 22 Classic uses a 20 inch motor. A motor is measured from the top inside of the transom bracket down to the anti-ventilation plate. (That's the first plate above the prop.)

A boat transom is measured from the top of the transom down to the bottom edge where the transom meets the hull bottom.
 
Thanks Robbi: Just what I need. C-Otter :D :D
 
Back
Top