Matching the gray of molded in non-skid on 87 Classic

C

colvosview

New member
I'm filling a couple of holes in the molded non-skid area on the bow. Has anyone used a paint or blend of colors that is similar? I'm planning to just do a touch up, and not paint all the gray. But my boat will never be absolutely pristine, so in this instance, close is ok.
 
David, My 2004 C-dory is presenting with the same issues. The holes should be cleaned with acetone and filled with epoxy resin first. Once cured, I plan to use gelcoat mixed with a small amount of talcum to prevent running and the possibility of future cracking. The applications would require using small 'dabs" carefully placed on top of the cured epoxy. I'll be watching to see if another C-brat has done this type of repair and how it has lasted.
 
Back
Top