I need a replacement part for my Orca door

S

skagitorca

New member
Sorry if I am posting in the wrong place. The sliding door to my 27 foot short cabin Orca will not close; the gripping mechanism inside the edge of the door appears to have disintegrated and needs replacement. Can you (c dory) send me a replacement set? Thanks so much for your help.
 
Sorry but this is not the site for the manufacturer, it's put together by a few hard working C-Dory owners and used by a lot of other lucky owners and fans. We know a lot about C-Dorys and someone may know something about the Orca. Good Luck....Take a look at the C-Dory!!
 
Thanks for the reply. I believe C Dory purchased the Skagit Orca Line so . . . . I believe this *is* the proper venue. I will check out Western Boat and very much appreciate your lead.
 
Hi Skagit Orca,
You are entirely correct that C-Dory has purchased the Skagit Orca and is now manufacturing them at the same C-Dory plant that manufactures the 24' C-Dory TomCat and the 25' C-Dory cruiser. Probably the best way for you to obtain help with your vessel would be to telephone the C-Dory Factory at 253-839-0222.
They apparently respond much better to phone calls than to e-mails.

As to the origin of this site. It was set up by one of your Calif. neighbors as a C-Dory owners group site and we certainly welcome all visitors.

I do hope that this helps you with your fine vessel.....there are a lot of them plying the waters of Northwestern Washington. :smiled
 
Back
Top