Force-10 Install...

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
RedFox inc' :lol: has an idea to contribute to the Brats (and maybe even C-D' if they listen! :shock: )

First off, if there is interest in the 'Pub; I need a Photo presented (here) (so I don't have to go diggin through the albums at the grueling speed of a mere "44k" :( ) It needs to be a shot of the cabinet, on the Starboard-Side, (stove/SInk area) all the way to the floor :!: :!:
I'll present in PhotoShop the plans on some cabinet modifications I had in mind, and was going to do to the Sundog (hehehe :xnaughty ) :lol: If we were going to go through with the best way (yes best way :xtongue :idea: ) to integrate the fabulously simple and dependable "Force-10".

I'm waiting... :disgust :disgust :o :o ........ :mrgreen:
 
Greg
Take a look at the heater installed on Rock-C, page 4 & 5 of our photo album. It is a Dickinson not a Force-10, but it has worked out well for us. With the glair off the sheet metal, some of the pics. are not too clear.
Terry
 
Greg, If you are looking for a picture of the galley as it comes from the factory, this is a picture on the factory site. I would post it here for you but apparently I don't have the talent for that.

Bill
 
If I did it again, I'd try a Dickenson! Reading a great book right now of a fishermans life, he had a Dickenson ... from "Old Man Dickenson" himself! It obviously lasted a very very long time, there was no bad remarks about it at all. (this is a BC Story, the one they made the movie with 'jackolin smith' (miss spelled :wink: )
Very nice install there to! :thup

Now. thnx for posting that pic DoGon, but I can't do a thing with it.. (I don't know why) :crook But basically, it is in the same spot as the one on my boat and Rays. I was going to put it there on the Cruiser Model to! Just need to cut cabinet and make heatsheild is all! It can be done... no problemo :thup When Sundog gets the Sundog over here,, i'll show the install progress here. If anyone still is interested here, try get me a pic posted, or link me to one somewhere, and I'll show you what I'm taking about in PhotoShop...
 
Back
Top