"C-Dory RedFox" and her projects...

  • Thread starter Thread starter Anonymous
  • Start date Start date
nice looking stuff there Greg...Don't let anybody in the neighborhood know about your weld shop or you'll find you have no time for boating & fishing anymore :)
 
Thankyou kind folks!

WC.... funny! :D I like that ... at this point, I'd ask ya to bring it over, can't get enough of this new machine ---- wahooo!! only thing that makes me cringe is the expense of the argon... it goes too quick, (I think) even with that larger bottle. I ordered there "Pyrex cup kit" and that apparatus comes with there "gas saver" thingy...

I have more to come - changed designs on the mountings lately, so I have to go get more pipe @ over 6$ a foot.

You should see some of the "welds" I did last night! I think I'm nearing "surgeon status" now .... hehehehe hang in there, ya'll will see my concept of what my "computer" (the one that came from the "Good Lord") dreamt-up for what I needed for a "hard-top" This is gettin expensive! :crook
Greg
drool.gif
 
Hey Greg, at least one of those holes isn't aligned and a few are smaller then the rest. You better finish that top and send it to me so it won't embarrass you :D

Can't wait to see what the final product looks like.
:beer :beer :beer I give it three beers up so far :smilep
 
Hey Greg! Cool stuff with yur hardtop set up. Spent some time pondering your site too... looken at the fuel tank set up... Send some details of your "hamburger box" set up. You got me wanting to just start cutting out the back end of my 18 Anger.... Norm and I had been bouncing around ideas for saddle tanks on our 18s too... Like you say...just not a lot or room on the floor with the other tank set ups.

Watching your welding project appears like you are enjoying your new toys.... Guess fishing pole projects have slid way on back.... grin. I aint going to be doing any fishing till around Jul06 it looks like. Then, going out to Oregon and getting on board with Mr. Fisherman for a nice tuna run....or 3.

Like that 10-22 canon lens too. Cool.

Byrdman
 
Wahoooo ... now that is a sledheads sled to-be-sure-mon!! :thup

I have a ton of new progress on the top to post, but can't get the time right now. :|

:star Byrdman, or anyone interested: I recreated that burger-box mounting. This time out of 2-inch stainless pipe! It is going to be my most beautifully-crafted welded-thingy to date!! ----------------- so, my old one is for sale!! I'll take a buck and a half for it "150.$ (that's a real steal) it is (I'm pretty sure anyway) "shippable" but hopefully there is an Alaskan wanting it, you can just come on by here, and get it :) The thing is adjustable too-boot! and of course practical indestructible! looks right nice when all painted-up too!

Thing is; I came across a crapload of mola lately ($) (OK- just kiddin) I have this great sponsor to help fund my inventions and projects, so I dreamed-up a new and completely stunning new "burger contraption" thingy, for the RedFox, that will match-better, my new stainless-pipe hard-top. (too much blabbin again - I know) So, I better end this post, and get to gettin more firewood today - it's ten below here in S-Anchorage, and I'm freshouta wood now! arrg! :crook :|
Greg

Also: Peep wanting on my old site "Sound Dreams" you have to tell me --- who in tarnation ya are!! and "post" to stay on. Don't want no more eves droppers over there, and I just kicked a few of them off today! (hehehehe)

I turn down empty applications. Trying to keep the place more "friendly" that way. And believe me youz --- I ain't trying to "divide this site" (I could not keep up with a super busy site anyway) and I'm sure Mike and Bill won't think anything bad about you, if you do post on either one of my sites and not here ---- grow up!! :disgust

To all the members here that met me, and don't take the worst into consideration --- thanks! :love and here's to more fun online. :beer :cigar
TTFN. Greg :bat :mrgreen:
 
Back
Top