Bennet Trim Tab Indicator

[nmitch2859]

My wife and I ,we were out in the Chesapeake Bay today. The Port trim tab would not work. The starboard works fine. I do have a blinking light on the trim tab indicator. I tried it on the hard, it sounded like the solenoid on the pump might be bad. It sounded like it was not pumping any fluid. Please help. Thanks Neal

 

[amy and karl]

We had that same problem and found it was a bad connection on the control unit near the pump. Hope that's all it is. You might give those wires a wiggle one at a time while looking at the indicator to see if the light turns solid.

Karl

 

[BrentB]

TabMan fromBennett has a trim tab forum located at
http://www.thehulltruth.com/tabmans-tri ... ussion-15/