Bennet Trim Tab Indicator

nmitch2859

New member
My wife and I ,we were out in the Chesapeake Bay today. The Port trim tab would not work. The starboard works fine. I do have a blinking light on the trim tab indicator. I tried it on the hard, it sounded like the solenoid on the pump might be bad. It sounded like it was not pumping any fluid. Please help. Thanks Neal
 
We had that same problem and found it was a bad connection on the control unit near the pump. Hope that's all it is. You might give those wires a wiggle one at a time while looking at the indicator to see if the light turns solid.

Karl
 
Back
Top