25 classic trailer guide on width

A

Aurelia

Active member
Joined
Aug 20, 2009
Messages
2,339
Reaction score
0
Anybody have the width dimension readily available for the side guides on a bunk trailer? Also the spread of your bunks and height from bunk up to guide bottom would be great.

I searched but could find these details.

Greg
 
did you buy a trailer?, whats next a tow vehicle? I thought you were a leave it in the water guy/ :P
D.D.
 
Yes, we found a good deal on one locally, no tow vehicle in the future for us, but future owners will likely appreciate the trailer (2011 Venture) and future is not too far off. I am still a leave it in the water guy for sure. It's a lonely place to be but I am used to that.

Greg
 
Greg, I would go out and measure for you but Daydream is in Yakima as you may know, and we have rollers not bunks.

Not to change the subject, but how would I go about changing from rollers to bunks? I know a lot of other people will tell me they don't have a problem with rollers, but I can't help but feel that centering on retrieval would be a lot easier with bunks due to that flat, flat bottom, which just does not self-center very well at all.
 
Find someone who wants rollers and trade trailers! They might be out there...
 
Pat Anderson":s92ch1bk said:
Greg, I would go out and measure for you but Daydream is in Yakima as you may know, and we have rollers not bunks.

Not to change the subject, but how would I go about changing from rollers to bunks? I know a lot of other people will tell me they don't have a problem with rollers, but I can't help but feel that centering on retrieval would be a lot easier with bunks due to that flat, flat bottom, which just does not self-center very well at all.
Click to expand...

Pat, you should be able to find the parts you need at this source...

http://www.etrailer.com/dept-pg-Boat_Tr ... -pa-2.aspx

Charlie
 
Back
Top