I thought I'd found the boat I've looked for a longtime. It's a 16 ft. cruiser with a Honda 40 HP. The first thing I noticed is how unstable it is when moving from side to side. I weigh 160 lbs and moving to the side the outside hull goes down 12 to 16 inches. Is that normal? I presently use a 17 ft Triumph boat and exclusively for fishing. It is the same width but only goes down about 4 inches when I move the same.
When the owner took the boat out and we passed into the main lake I thought he was just waiting to open it up. He asked me to take over and the first thing I wanted to do was see what the top speed was. To my surprise I found we were at top speed. It wasn't even close to planning out. The nose was sticking straight up. I looked at the RPMs and it was pegged out at 4800. It didn't have a speedometer but from experience I guessed we were at 10 to 12 MPH. My Triumph runs 31 MPH at 5200 RPMs with a 60 HP Mercury. I've looked for this boat for two years and was so disappointed. I had a roll of cash in my pocket and planned on bringing it home. NO WAY unless someone out there can tell me whats going on. Never been in the 16 cruiser so I'd really like some feedback. Another thing I noticed is that it was trimmed all the way down and when I just touched it to bring the trim up the prop came out of the water. Is the motor even mounted right? HELP
When the owner took the boat out and we passed into the main lake I thought he was just waiting to open it up. He asked me to take over and the first thing I wanted to do was see what the top speed was. To my surprise I found we were at top speed. It wasn't even close to planning out. The nose was sticking straight up. I looked at the RPMs and it was pegged out at 4800. It didn't have a speedometer but from experience I guessed we were at 10 to 12 MPH. My Triumph runs 31 MPH at 5200 RPMs with a 60 HP Mercury. I've looked for this boat for two years and was so disappointed. I had a roll of cash in my pocket and planned on bringing it home. NO WAY unless someone out there can tell me whats going on. Never been in the 16 cruiser so I'd really like some feedback. Another thing I noticed is that it was trimmed all the way down and when I just touched it to bring the trim up the prop came out of the water. Is the motor even mounted right? HELP