Search results

Did you want to look at it or take it for a test drive?

Selling my ’07 Honda 90 HP BF90DKLRTA with 1,500 hours. This motor is in good condition, runs great, and has been well maintained with documentation and service records available. Highlights: • Smooth, quiet, and fuel-efficient Honda reliability • 1,500 hours – well cared for and serviced on...

After meticulously polishing and waxing Plan C for the last 8 years, I finally decided it was more than I wanted to deal with. After checking around, I was referred to Jeff and his crew at Marine Detail Specialists (https://marinedetailspecialists.com/) VERY well done!!! Plan C is shiny and...

Thanks Bob! I'm using a bleach and water mix but it sure is difficult to get in behind some of those tight places! As long as I give everything a good rinsing, do you think there's any concern for the bleach damaging or eroding 'stuff'?

I've been pretty meticulous cleaning mold from the both inside walls of the fuel tanks under the motor well, in the starboard battery compartment and in the area back around the drain plug of my 22' '05. I figured there was mold on the other sides but, until I took off the panel protecting the...

I got one for my '05 22' on Amazon https://www.amazon.com/Stainless-Furnit ... =8-30&th=1

Ours is an '04 22' with a Honda 90 - we're moored at the County dock in Cornet Bay. I'd be happy to give you a tour and a test ride. Call me at 425-652-2498

Thanks Bob! I actually ended up putting a bolt and wingnut thru the table leg and table top. THAT oughta hold it!!

www.dairiki.org has some current tables as does Deepzoom.com. Not sure of Canadian coverage, I use it for getting in and out of Deception Pass and currents for shrimping "out there"

When the table leaf on the cabin table of my '04 22 cruiser is folded down, it bangs on the table leg. I put a felt pad between the leaf and the leg but, having just put on a new table leg - the old one was pretty rusted - I would like to fix this while I've got momentum. Any ideas?

I've got 3 lines going into the base of the fuel/water filter. I get that one is 'in' and the other is 'out' but what's the other one that has a female hose fitting?

I got an ACE with the Hands Free attachment. OMG!!! The hands free attachement is an absolute godsend!!! http://acelinehauler.com/bulldog-hands-free-accessory It's $89 and worth every single penny. No more bending over, keeping tension on the line or back aches. Just run it thru the pulleys...

When I first met my wife, I told her with a wink there was a dozen things I did well in life. After a miserable opening, I may have to drop shrimp fishing from that list. We did not do well (MA6). The usual spots (pun intended) that have never failed to give us multiple limits in a single set...

I'm hoping they will be sampling, test fishing and using ramp counts to get a handle on the effort, confirm quotas and be giving us more dates in July and August.

I'm hoping they will be sampling, test fishing and using ramp counts to get a handle on the effort, confirm quotas and be giving us more dates in July and August.

I've used Sta-Bil for years and never had any fuel issues. Today, as I was getting things ready for spring, I read the label and noticed it's only good for 2 years. According to Dr Google, the code tells you when it was made. "16264-87649-2233. This bottle based on the code was made on the...

I'm encouraging them to stop increasing the limits then turning around and closing the season early like they have in 3 of the last 4 years. I've got a list of email addresses and a copy of a letter I sent to everyone from the Director on down thru the Commissioners, Advisory Group and Shellfish...

I'm hoping someone here has already researched this and come up with a good replacement. Electronics isn't my strong suit. The only thought Ive got is minimizing the replacement of cables and fittings to the Garmin GMR18HD radar and the GSD24 sonar I've got. Thoughts?

Thanks for your help!!!!

A C Brat I ran into a has been unable to log in to the site. He gave me his email, what he thought was his user name and a 'maybe' password. None of it worked for me. (he hasn't been able to get any of it to work) Trying to register him as a first time user came back with the message that his...