Search results

Thank You Ed.

Should I remove my cloth engine cover before towing the boat on the highway ? Thank You Bill Kelleher

Check Harbor Freight. Bill Kelleher

Another trick is to run water around the vacuum hose connection at the boat to help seal it. Bill Kelleher

Here is link to a parts list, it may help. I could not find a manual for the 875. http://www.thetford.com/HOME/PARTS/Port ... fault.aspx Bill Kelleher

Look for an inline fuse somewhere in the positive wire. Bill Kelleher

You do NOT make a vacuum on the tank, just the pumpout hose. I would say that either that hose and fittings has a leak or your not drawing from the bottom of the tank. If you close the vent line and get the other problem fixed you will collapses the holding tank. Bill Kelleher

I am using a 4 blade 13.75" D X 15" P 1989 22' cruiser 2013 90 hp Honda Bill Kelleher

Wasn't me, I was answering somebody else. Bill Kelleher

Can you make the holder longer and stack one on top of the other ? Bill Kelleher

I have a 1989 22' cruiser with a 2013 90 hp Honda and it will idle down to 2 mph. Bill Kelleher

Check for fuses under the engine cover. Bill Kelleher

I boat on my 22' out of Toledo. Bill Kelleher

Steve, Did you have the label plate custom made ? When I looked at a new valve I was told that they didn't come with a label plate anymore. Thank You Bill Kelleher

Take a look at your vent lines, they make inline devices that stop the gas from coming out of the vent while filling. You may have one of these in your vent lines. Bill Kelleher "In my case the fuel does not come out the vent. It fountains out of the filler neck. Nothing comes out of the...

I just had a new trailer built for my 1989 22' and the people that built it said that I should ask $800. 1989 easy loader roller trailer. This is in Toledo Ohio Bill Kelleher

Sunbeam, I bought one of these shields at West Marine. Bill Kelleher Light Glare Shield PERKO Light Glare Shield Model # 192411 | Mfg # 1192DP0BLK $13.99

Be careful, the 50a shorepower connections at marina's around here are 240v not 120v. Bill Kelleher

Check your vent hose from one end to the other. Bill Kelleher

You lose that bet. :) I have been using remote external tire pressure sensors since 2009. I change them from one trailer to another. Quote I will bet (Me the Outlier) a box of Black Box Pinot Grigio that we are the only Brats using a remote RF system like this. I just want others to know that...