Search results

I have a 2004 16' Cruiser. I'm considering moving from portable tanks to a larger, fixed tank. I'm interested in the opinions of those with a 16 on such a move, especially anyone who has personally installed a larger tank. Thanks. I want to increase my cruising range. I wonder about my...

I now own a 2006 16 cruiser with a 50hp Honda. The boat/motor sat unused for 4 years, so the carbs needed cleaning. The Honda now runs fine. I've never winterized an outboard before and the manual says to: Add a fuel stabilizer Drain the fuel system, including draining each of the carbs...

Is Prarieboy complete? Any recent pictures? Sorry, don't have any advice on the motor.

I'm believe the red/white wires coming from the gages are specifically for lighting.

The manual for my 16 cruiser says: If you would like your motor instrument lights to come on with your running lights, attach the instrument light's wire to the running light switch. You can do the same for your compass light. On my 16 ( with a Honda 50) I have red/white wires from the tach...

I ended up ordering a gel coat repair kit from GELCOAT Products in Seattle for $35. The kit comes with 1oz of paste. A quart is the next smallest quantity and it costs about $120 with the hardener.

I just noticed that the owners manual lists the manufacture as COOK and the color is red 953RA076.

Yes, the pictures in my album (Beagle ) are of our former boat. Our new CDory is red. I have the original invoice and owners manual and they both say red. Spectrum is $500 for the gallon.

I have a 2006 16 with red accents. What is my best option to obtain matching gelcoat for deap scratch repair? Thanks.

Beagle has been sold.

See Beagle album for pictures 2001 90 HP Nissan TLDI, 300 hrs, w/permatrim 2001 8 HP Yamaha, steering connection to big motor, remote throttle Bennett trim tabs Full camper canvas, barely used 2 larger gas tanks w/newer fuel plumbing High radar arch (no radar) GPS mapping unit Fish finder VHF...

Yes, I copied C-Batical, and did it myself. I bought and used a roto tool to cut the openings. Used the same tool to widen the v-birth opening.

My port one is movable also. I just have a little extra wire in that box and it seems to work. My biggest concern is damaging the speaker as I take things in and out of the box.

I cut mine into the seat boxes. There is a picture of one in my "Interior" album. I had a pair mounted high and at the stern, but I did not like them right behind my head when sitting in the rear, port seat. I like the sound better where they are now.

Peter, I replaced the interior of Beagle - a 1987 cruiser. One benefit of doing it yourself is you make it what you want. I used marine plywood and laminate. In a couple of hours the interior was out, used the old pieces as templates (somewhat), was fun putting back together. It was a good...

The Beagle crew plan to tour western Montana in September. At first we were considering renting a motor home, but are now considering talking Beagle, and camping and boating. How are the lakes in Sept? Drained? Any high-mountain lakes we should consider? How far east do you have to go before...

I bought Bluetooth Dual external GPS receiver for my iPad2. It works well.

So what iPad mount do you use with the suction ball? Is it a ram part as well? Thanks.

I bought a bluetooth Dual XGPS 150 for my iPad I like it.